- Home
- ยป
- Products & Services
- »
- Pharmaceutical Tablets
Pharmaceutical Tablets
Pregnyl 10000 Iu Injection
Minimum Order Quantity: 1 Vial
Product Brochure
Strength | 10000 IU |
Dose | 10000 |
Packaging Size | 10000 Usp Units Per Vial |
Packaging Type | Vial |
Brand | merck |
Country of Origin | Made in India |
Pregnyl Injection is a medication commonly used in the field of reproductive health. It contains the active ingredient human chorionic gonadotropin (hCG), which is a hormone produced during pregnancy. Pregnyl is often prescribed to address various fertility and hormonal issues. Here is an introduction to Pregnyl Injection
Uses:
Ovulation Induction: Pregnyl is often prescribed to women who are undergoing fertility treatments, such as in vitro fertilization (IVF) or intrauterine insemination (IUI). It helps trigger ovulation (the release of an egg from the ovary) in women who have difficulty ovulating on their own.Hypogonadism in Men: Pregnyl can be used to treat hypogonadism, a condition where the testes do not produce enough testosterone. It stimulates the testes to produce testosterone, which is important for the development of male reproductive tissues and the maintenance of male secondary sexual characteristics.Cryptorchidism Treatment: Pregnyl is sometimes used in young boys with cryptorchidism, a condition where one or both testes have not descended into the scrotum. The hormone stimulation may aid in the descent of the testes.Luteal Phase Support: In assisted reproductive techniques like IVF, Pregnyl may be used to support the corpus luteum, a temporary endocrine structure that produces progesterone during the early stages of pregnancy.
Side Effect:
• Injection Site Reactions• Ovarian Hyperstimulation Syndrome (OHSS) (in women)• Gynecomastia (in men)• Mood Changes• Fatigue• Headache• Fluid Retention• Blood Clot Formation (rare)• Allergic Reactions (rare)
Dosages:
For Ovulation Induction in Women:A typical dosage for triggering ovulation is 5,000 to 10,000 international units (IU) of hCG. The injection is usually given when the eggs (follicles) are mature, as determined by ultrasound monitoring.
For Hypogonadism in Men:Dosages can vary, but a common starting dosage might be around 1,000 to 2,000 IU of hCG, two to three times per week. The dosage can be adjusted based on testosterone levels and clinical response.
For Cryptorchidism Treatment in Boys:The dosage can vary based on the child's age and condition, but a typical dose might be around 2,000 to 5,000 IU of hCG as a single injection.
For Luteal Phase Support in Assisted Reproduction (IVF):Dosages can vary, but a common dosage might be around 1,500 to 5,000 IU of hCG, administered as a single dose after egg retrieval or embryo transfer.
FAQs:
1. What is Pregnyl Injection?Ans. Pregnyl Injection is a medication that contains human chorionic gonadotropin (hCG), a hormone produced during pregnancy. It is used for various purposes in reproductive health.
2. What is the purpose of Pregnyl Injection?Ans. Pregnyl is used to induce ovulation in women undergoing fertility treatments, manage testosterone levels in men with hypogonadism, treat cryptorchidism in young boys, support the luteal phase in assisted reproduction, and for other reproductive health purposes.
3. How is Pregnyl Injection administered?Ans. Pregnyl is typically administered as an intramuscular (IM) or subcutaneous (SC) injection by a healthcare professional.
4. How does Pregnyl work?Ans. Pregnyl contains hCG, a hormone that mimics luteinizing hormone (LH), which plays a role in ovulation and testosterone production.
Additional Information:
- Production Capacity: 1000
Triamcinilone Acetonide Injections
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Zubicort |
Packaging Type | Box |
Manufacturer | ShinePro Life Sciences Private Limited |
Product Type | Finished Product |
Dosage Form | Injection |
Country of Origin | Made in India |
Introduction:
Triamcinolone acetonide injections are a type of corticosteroid medication that is used to treat various inflammatory conditions. This introduction will provide an overview of what triamcinolone acetonide injections are, how they work, their uses, and some important considerations.
Triamcinolone acetonide is a synthetic corticosteroid that has potent anti-inflammatory and immunosuppressive properties. It is available in various forms, including creams, ointments, oral tablets, and injectable formulations. In this introduction, we will focus on the injectable form.
Uses:
Joint Conditions: Triamcinolone injections are frequently used to manage pain and inflammation associated with various joint conditions, including osteoarthritis, rheumatoid arthritis, gouty arthritis, and psoriatic arthritis.
Bursitis and Tendinitis: Injections of triamcinolone acetonide can be used to alleviate inflammation and pain caused by bursitis (inflammation of fluid-filled sacs) and tendinitis (inflammation of tendons).
Allergies and Allergic Reactions: Triamcinolone acetonide injections are effective in managing severe allergic reactions and conditions like allergic rhinitis (hay fever) and allergic asthma.
Side Effects:
• Injection site reactions: pain, redness, swelling, or bruising at the injection site
• Thinning of the skin
• Changes in skin pigmentation (lighter or darker patches)
• Delayed wound healing
• Increased risk of infection
• Osteoporosis (weakening of bones)
• Adrenal suppression (reduced natural cortisol production)
Dosages:
Joint Conditions (Arthritis, Bursitis, Tendinitis):
Intra-articular injection (directly into the affected joint): 2.5 to 40 mg per injection, repeated as needed, but not more frequently than every 3 to 4 weeks.
Allergic Reactions and Skin Conditions:
Intramuscular injection (into the muscle): 40 to 80 mg as a single dose, repeated as needed.
Intralesional injection (directly into the lesion or affected area of the skin): Doses typically range from 2.5 to 40 mg, depending on the size and location of the lesion.
Inflammatory Bowel Disease (IBD):
Intramuscular or intralesional injections: Doses are usually tailored to the specific condition and individual response, typically ranging from 20 to 60 mg per injection.
FAQs:
1. What are Triamcinolone Acetonide Injections used for?
Ans. Triamcinolone Acetonide Injections are used to treat various inflammatory conditions, including joint conditions (arthritis, bursitis, tendinitis), allergies, skin conditions (psoriasis, eczema), inflammatory bowel disease (IBD), eye conditions, and more.
2. How do Triamcinolone Acetonide Injections work?
Ans. Triamcinolone is a corticosteroid that works by suppressing the immune response and reducing inflammation at the site of injection.
3. How are Triamcinolone Acetonide Injections administered?
Ans. Triamcinolone Acetonide Injections are typically administered by a healthcare professional as an intramuscular injection, intra-articular injection (into the joint), or intralesional injection (directly into the skin lesion).
4. Are Triamcinolone Acetonide Injections painful?
Ans. The injections may cause some discomfort or pain at the injection site, but this is usually temporary and tolerable. The healthcare provider may use local anesthesia to minimize discomfort.
Additional Information:
- Production Capacity: 1000
Triamcinolone Acetonide Injection
Minimum Order Quantity: 1 Piece
Product Brochure
Strength | 0.1% |
Brand | Tamocin |
Usage/Application | Hospital |
Packaging Type | vial |
Size | 1 ml |
Country of Origin | Made in India |
Triamcinolone acetonide injection is a medication used for various medical conditions that involve inflammation and immune system responses. It belongs to a class of drugs known as corticosteroids, which are synthetic versions of hormones naturally produced by the adrenal glands. Triamcinolone acetonide injection is typically administered directly into the affected area or into a muscle to provide localized relief or to address systemic inflammation. Here's an introduction to triamcinolone acetonide injection
Uses:
Inflammatory Joint Conditions:Arthritis: Triamcinolone injections can be used to alleviate symptoms of various types of arthritis, including osteoarthritis and rheumatoid arthritis. It can help reduce pain, swelling, and inflammation in affected joints.
Soft Tissue Inflammation:Bursitis: Triamcinolone injections may be administered to reduce inflammation in bursae (small fluid-filled sacs) near joints, relieving pain and discomfort.Tendinitis: It can be used to treat inflamed tendons, such as tennis elbow or golfer's elbow, by reducing inflammation and pain.
Skin Conditions:Dermatitis: Triamcinolone injections may provide relief from severe cases of dermatitis, including atopic dermatitis and contact dermatitis.Psoriasis: Injections can help manage psoriasis plaques and reduce itching and inflammation.
Side Effect:
• Increased risk of infections• Allergic reactions (skin rash, itching, swelling, difficulty breathing)• Elevated blood sugar levels• Fluid retention (swelling, increased blood pressure)• Weight gain• Mood changes (irritability, anxiety, mood swings)• Osteoporosis (bone weakening)• Adrenal suppression (reduced natural corticosteroid production)• Cataracts and glaucoma (with injections near the eye)
Dosages:
Inflammatory Conditions:For joint conditions (e.g., arthritis, bursitis, tendinitis), the typical dosage ranges from 2.5 mg to 40 mg injected directly into the affected joint.For soft tissue inflammation, such as bursitis or tendinitis, dosages can range from 10 mg to 40 mg injected into the affected area.
Skin Conditions:For dermatologic conditions like eczema, psoriasis, or dermatitis, dosages can range from 2.5 mg to 40 mg injected directly into the affected area (intralesional injection).
Allergic Reactions:Dosages for managing severe allergic reactions can vary widely based on the severity and individual response. It may range from 40 mg to higher doses, often administered intravenously in emergency settings.
FAQs:
1. What is Triamcinolone Acetonide Injection?Ans. Triamcinolone Acetonide Injection is a corticosteroid medication used to treat various inflammatory conditions, allergic reactions, and certain skin conditions. It helps reduce inflammation, pain, and other symptoms by suppressing the immune response.
2. What conditions can Triamcinolone Acetonide Injection treat?Ans. Triamcinolone Acetonide Injection is used to treat inflammatory joint conditions (arthritis, bursitis, tendinitis), skin conditions (eczema, psoriasis), allergic reactions, respiratory conditions (severe asthma exacerbations), and eye conditions (under the guidance of an ophthalmologist).
3. How is Triamcinolone Acetonide Injection administered?Ans. It is administered through injection directly into the affected joint, soft tissue, or skin area. The injection can also be given intravenously for certain conditions or intramuscularly.
4. Are there any common side effects of Triamcinolone Acetonide Injection?Ans. Common side effects can include pain or discomfort at the injection site.
Additional Information:
- Production Capacity: 1000
Trelegy Ellipta Inhaler
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Trelegy Ellipta Powder For Inhalation |
Composition | Fluticasone Furoate (100mcg) + Umeclidinium (62.5mcg) + Vilanterol (25mcg) |
Treatment | Chronic obstructive pulmonary disease (COPD) |
Manufacturer | Glaxo SmithKline Pharmaceuticals Ltd |
Packaging Type | Box |
Country of Origin | Made in India |
Trelegy Ellipta is a prescription medication used to treat chronic obstructive pulmonary disease (COPD) in adults. It is a combination of three active ingredients: fluticasone furoate (an inhaled corticosteroid), umeclidinium (an anticholinergic), and vilanterol (a long-acting beta-agonist).COPD is a chronic lung disease characterized by difficulty breathing, persistent cough, and increased production of mucus. It includes conditions such as emphysema and chronic bronchitis. Trelegy Ellipta is designed to help manage the symptoms and reduce exacerbations in patients with COPD.
Uses:
Fluticasone furoate: It is an inhaled corticosteroid that helps reduce inflammation in the airways. By decreasing inflammation, it can improve breathing and reduce the frequency and severity of COPD exacerbations.Umeclidinium: This is an anticholinergic agent that helps relax the muscles around the airways. By doing so, it opens up the air passages, making it easier to breathe and reducing symptoms like breathlessness and wheezing.Vilanterol: It is a long-acting beta-agonist that acts as a bronchodilator, opening up the airways and allowing more air to flow in and out of the lungs. This helps improve lung function and makes breathing easier for individuals with COPD.
Side Effects:
• Upper respiratory tract infections (e.g., cold, flu)• Headache• Back pain• Pneumonia• Thrush (fungal infection in the mouth or throat)• Cough• Hoarseness
Dosages:
Fluticasone furoate: 100 microgramsUmeclidinium: 62.5 microgramsVilanterol: 25 micrograms
FAQs:
1. What is Trelegy Ellipta, and how does it work?Ans. Trelegy Ellipta is a combination medication used to treat chronic obstructive pulmonary disease (COPD) in adults. It contains three active ingredients: fluticasone furoate (an inhaled corticosteroid), umeclidinium (an anticholinergic), and vilanterol (a long-acting beta-agonist). The combination of these medications helps to improve lung function, reduce inflammation in the airways, relax the muscles around the airways, and provide 24-hour symptom relief for patients with COPD.
2. What is the usual dosage of Trelegy Ellipta?Ans. The typical dosage of Trelegy Ellipta is one inhalation once daily. Each inhalation delivers fixed doses of fluticasone furoate 100 mcg, umeclidinium 62.5 mcg, and vilanterol 25 mcg. The medication is delivered via a dry powder inhaler, and patients should use it as prescribed by their healthcare provider.
3. How should I use the Trelegy Ellipta inhaler?Ans. The Trelegy Ellipta inhaler is breath-activated. To use it, remove the cover, breathe out gently away from the inhaler, place the mouthpiece in the mouth, and take a deep, fast breath in. After inhalation, hold the breath for a few seconds before exhaling. Patients should not shake the inhaler before use and should rinse the mouth with water after inhalation to reduce the risk of oral thrush.
4. Is Trelegy Ellipta a rescue inhaler?Ans. No, Trelegy Ellipta is not a rescue inhaler. It is a long-acting maintenance medication for COPD. Patients experiencing sudden breathing problems or exacerbations should have a separate short-acting bronchodilator for quick relief, as prescribed by their healthcare provider.
Additional Information:
- Production Capacity: 1000
Cenforce Professional Tablets
Minimum Order Quantity: 1 Box
Product Brochure
Pack Size | 10 Tablets |
Brand | Cenforce Professional |
Manufacturer | Centurion Laboratories |
Composition | Sildenafil Citrate Sublingual |
Country of Origin | Made in India |
Introduction :
Sildenafil citrate is a medication used for the treatment of erectile dysfunction (ED) in adult men. It is the active ingredient in the well-known brand name medication Viagra. Sildenafil citrate belongs to a class of drugs called phosphodiesterase type 5 (PDE5) inhibitors.
Erectile dysfunction is a condition characterized by the inability to achieve or maintain an erection sufficient for sexual activity. It can be caused by various factors, such as age, underlying health conditions, psychological factors, or lifestyle choices. Sildenafil citrate works by inhibiting the enzyme PDE5, which allows for increased blood flow to the penis, facilitating the ability to achieve and maintain an erection.
Uses :
Sildenafil citrate works by inhibiting the enzyme phosphodiesterase type 5 (PDE5), which leads to increased blood flow to the penis. This increased blood flow helps to relax the smooth muscles in the penis, allowing for an erection to occur when sexual stimulation is present.
Here are the key uses of sildenafil citrate:
Erectile Dysfunction (ED): Sildenafil citrate is widely prescribed to treat erectile dysfunction. It helps men with ED achieve and maintain an erection that is suitable for sexual intercourse. It is important to note that sildenafil citrate does not cure the underlying causes of erectile dysfunction but provides temporary relief from the symptoms.
Pulmonary Arterial Hypertension (PAH): Sildenafil citrate is also used to treat pulmonary arterial hypertension, a condition characterized by high blood pressure in the arteries that supply the lungs.
Side Effects :
- Headache: One of the most common side effects is a headache, which may be mild to moderate in intensity.
- Flushing: Some individuals may experience flushing or a feeling of warmth and redness in the face, neck, or chest.
- Indigestion: Sildenafil citrate can cause indigestion, characterized by symptoms such as stomach discomfort, bloating, or acid reflux.
- Nasal congestion: It can cause a stuffy or runny nose.
- Visual disturbances: Some individuals may experience changes in color vision, blurred vision, or increased sensitivity to light.
-
Standard Dosage: The typical starting dose for most individuals is 50 milligrams (mg) of sildenafil citrate. This is usually taken approximately 1 hour before sexual activity.
FAQs:
1. What is sildenafil citrate used for?
Ans. Sildenafil citrate is primarily used for the treatment of erectile dysfunction (ED) in adult men. It helps to improve erectile function and enable men to achieve and maintain erections suitable for sexual activity.
2. How does sildenafil citrate work?
Ans. Sildenafil citrate belongs to a class of drugs called phosphodiesterase type 5 (PDE5) inhibitors. It works by inhibiting the enzyme PDE5, which relaxes the blood vessels in the penis, allowing for increased blood flow and the ability to achieve and sustain an erection.
3. How long does sildenafil citrate last?
Ans. The effects of sildenafil citrate typically last for about
4. Is sildenafil citrate a prescription medication?
Ans. Yes, sildenafil citrate is a prescription medication. It is important to consult with a healthcare professional to assess your medical history, current medications, and any underlying health conditions before using sildenafil citrate 4 to 6 hours.
Additional Information:
- Production Capacity: 1000
Cenforce 150mg Sildenafil Tablets
Minimum Order Quantity: 1 Box
Product Brochure
Strength | 50 mg |
Pack Size | 10 Tablets |
Brand | Cenforce 150 |
Manufacturer | centurion remedies |
Country of Origin | Made in India |
Introduction :
Sildenafil citrate is a medication used for the treatment of erectile dysfunction (ED) in adult men. It is the active ingredient in the well-known brand name medication Viagra. Sildenafil citrate belongs to a class of drugs called phosphodiesterase type 5 (PDE5) inhibitors.
Erectile dysfunction is a condition characterized by the inability to achieve or maintain an erection sufficient for sexual activity. It can be caused by various factors, such as age, underlying health conditions, psychological factors, or lifestyle choices. Sildenafil citrate works by inhibiting the enzyme PDE5, which allows for increased blood flow to the penis, facilitating the ability to achieve and maintain an erection.
Uses :
Sildenafil citrate works by inhibiting the enzyme phosphodiesterase type 5 (PDE5), which leads to increased blood flow to the penis. This increased blood flow helps to relax the smooth muscles in the penis, allowing for an erection to occur when sexual stimulation is present.
Here are the key uses of sildenafil citrate:
Erectile Dysfunction (ED): Sildenafil citrate is widely prescribed to treat erectile dysfunction. It helps men with ED achieve and maintain an erection that is suitable for sexual intercourse. It is important to note that sildenafil citrate does not cure the underlying causes of erectile dysfunction but provides temporary relief from the symptoms.
Pulmonary Arterial Hypertension (PAH): Sildenafil citrate is also used to treat pulmonary arterial hypertension, a condition characterized by high blood pressure in the arteries that supply the lungs.
Side Effects :
- Headache: One of the most common side effects is a headache, which may be mild to moderate in intensity.
- Flushing: Some individuals may experience flushing or a feeling of warmth and redness in the face, neck, or chest.
- Indigestion: Sildenafil citrate can cause indigestion, characterized by symptoms such as stomach discomfort, bloating, or acid reflux.
- Nasal congestion: It can cause a stuffy or runny nose.
- Visual disturbances: Some individuals may experience changes in color vision, blurred vision, or increased sensitivity to light.
Dosage :
-
Standard Dosage: The typical starting dose for most individuals is 50 milligrams (mg) of sildenafil citrate. This is usually taken approximately 1 hour before sexual activity.
Adjustment of Dosage: Depending on how well the medication works and the presence of any side effects, your healthcare professional may adjust the dosage. The dose can be increased to 100 mg for those who do not respond adequately to the 50 mg dose, or it can be decreased to 25 mg for those who experience side effects.
FAQs:
1. What is sildenafil citrate used for?
Ans. Sildenafil citrate is primarily used for the treatment of erectile dysfunction (ED) in adult men. It helps to improve erectile function and enable men to achieve and maintain erections suitable for sexual activity.
2. How does sildenafil citrate work?
Ans. Sildenafil citrate belongs to a class of drugs called phosphodiesterase type 5 (PDE5) inhibitors. It works by inhibiting the enzyme PDE5, which relaxes the blood vessels in the penis, allowing for increased blood flow and the ability to achieve and sustain an erection.
3. How long does sildenafil citrate last?
Ans. The effects of sildenafil citrate typically last for about
4. Is sildenafil citrate a prescription medication?
Ans. Yes, sildenafil citrate is a prescription medication. It is important to consult with a healthcare professional to assess your medical history, current medications, and any underlying health conditions before using sildenafil citrate 4 to 6 hours.
Additional Information:
- Production Capacity: 1000
Tadalista 10mg Tadalafil Tablets
Minimum Order Quantity: 1 Stripe
Product Brochure
Strength | 10 mg |
Pack Size | 1*10 Tablets |
Brand | Tadalista 10mg Tablets |
Packaging Type | Box |
Composition | Tadalafil 10 mg |
Manufacturer | Ajanta Pharma |
Country of Origin | Made in India |
Introduction :
Tadarise 10mg Tablets is a prescription drug used to treat impotence in men who have erectile dysfunction. The penis receives more blood as a result of its action. This facilitates male erection onset or maintenance. It is a member of a class of drugs called phosphodiesterase type 5 (PDE 5) inhibitors.
You can consume a Tadarise 10mg Tablets with food or on an empty stomach. It must be taken exactly as your doctor has prescribed. Take a break around an hour before your planned sex. Work requires different amounts of time depending on the individual, but often takes between 30 minutes and an hour. Only when you are sexually stimulated can this medication assist you in achieving an erection.However, you should not take this medicine if you do not have erectile dysfunction. It should not be taken more than once a day.
Uses :
Treatment of Erectile dysfunction
Benefits :
In Treatment of Erectile dysfunction :
Tadarise 10mg Tablets belongs to a group of medicines called PDE5 inhibitors. It works by relaxing the blood vessels in your penis. This allows blood to flow into the penis and produce an erection when sexually aroused. This medicine will only help get an erection if you are sexually stimulated. It is very effective but needs to be taken at least 30 minutes before sexual activity.
Do not take this medicine if you also take medicines called nitrates (often given for chest pain).
Side Effects :
Most side effects do not require any medical attention and disappear as your body adjusts to the medicine. Consult your doctor if they persist or if you’re worried about them
Common side effects of Tadarise :
Flushing (sense of warmth in the face, ears, neck and trunk)
Headache
Stiffness
Nosebleeds
Blurred vision
Indigestion
Muscle pain
Upset stomach
Rash
Tadarise 10mg Tablets is a prescription drug used to treat impotence in men who have erectile dysfunction. The penis receives more blood as a result of its action. This facilitates male erection onset or maintenance. It is a member of a class of drugs called phosphodiesterase type 5 (PDE 5) inhibitors.
Uses :
Treatment of Erectile dysfunction
Benefits :
In Treatment of Erectile dysfunction :
Tadarise 10mg Tablets belongs to a group of medicines called PDE5 inhibitors. It works by relaxing the blood vessels in your penis. This allows blood to flow into the penis and produce an erection when sexually aroused. This medicine will only help get an erection if you are sexually stimulated. It is very effective but needs to be taken at least 30 minutes before sexual activity.
Do not take this medicine if you also take medicines called nitrates (often given for chest pain).
Side Effects :
Most side effects do not require any medical attention and disappear as your body adjusts to the medicine. Consult your doctor if they persist or if you’re worried about them
Common side effects of Tadarise :
Flushing (sense of warmth in the face, ears, neck and trunk)
Headache
Stiffness
Nosebleeds
Blurred vision
Additional Information:
- Production Capacity: 1000
Tadacip 20mg Tadalafil Tablets
Minimum Order Quantity: 1 Stripe
Product Brochure
Strength | 20 mg |
Brand | Tadacip 20mg Tablets |
Pack Size | 10 Tablets |
Packaging Type | Box |
Composition | Tadalafil 20 mg |
Form | Tablets |
Manufacturer | Tadalafil 20mg Tablets |
Country of Origin | Made in India |
Introduction :
Tadacip 20mg Tablets is a prescription drug used to treat impotence in men who have erectile dysfunction. The penis receives more blood as a result of its action. This facilitates male erection onset or maintenance. It is a member of a class of drugs called phosphodiesterase type 5 (PDE 5) inhibitors.
You can consume a Tadacip 20mg Tablets with food or on an empty stomach. It must be taken exactly as your doctor has prescribed. Take a break around an hour before your planned sex. Work requires different amounts of time depending on the individual, but often takes between 30 minutes and an hour. Only when you are sexually stimulated can this medication assist you in achieving an erection.However, you should not take this medicine if you do not have erectile dysfunction. It should not be taken more than once a day.
The flushing (warmth sensation), headache, dizziness, blurred vision, muscle soreness, upset stomach, and rash are this medication's most frequent side effects. If any of the adverse effects annoy you or do not go away, speak with your doctor.
Women should not use this medication, and males should refrain from taking any other impotence medications without first consulting a doctor. Combining it with nitrate-containing medications carries some risk (often given for chest pain or angina). If you have serious heart or liver issues, a recent stroke or heart attack, low blood pressure, or any of the aforementioned conditions, you should not use this medication.
Uses :
Treatment of Erectile dysfunction
Benefits :
In Treatment of Erectile dysfunction :
Tadacip 20mg Tablets belongs to a group of medicines called PDE5 inhibitors. It works by relaxing the blood vessels in your penis. This allows blood to flow into the penis and produce an erection when sexually aroused. This medicine will only help get an erection if you are sexually stimulated. It is very effective but needs to be taken at least 30 minutes before sexual activity.
Do not take this medicine if you also take medicines called nitrates (often given for chest pain).
Side Effects :
Most side effects do not require any medical attention and disappear as your body adjusts to the medicine. Consult your doctor if they persist or if you’re worried about them
Common side effects of Tadacip :
Flushing (sense of warmth in the face, ears, neck and trunk)
Headache
Stiffness
Nosebleeds
Blurred vision
Indigestion
Muscle pain
Upset stomach
Rash
Additional Information:
- Production Capacity: 1000
Iverheal 6mg Ivermectin Tablets
Minimum Order Quantity: 1 Strip of 10 Tablets
Product Brochure
Strength | 6mg |
Dosage | 6mg |
Packaging Type | Box |
Manufacturer Name | Healing Pharma |
Composition (Salts) | Ivermectin 6mg Tablets |
From | Tablets |
Introduction :
Ivermectin is an antiparasitic medication that has gained attention for its potential therapeutic uses beyond its original intended purpose. It was first discovered in the 1970s and has since been used to treat a variety of parasitic infections in both humans and animals.
The drug works by targeting and disrupting the nervous system of parasites, leading to their paralysis and subsequent death. It is highly effective against a wide range of parasites, including certain types of worms, mites, and insects.
Uses :
- Treatment of Parasitic Infections
- River Blindness (Onchocerciasis)
- Strongyloidiasis
- Head Lice
- Animal Health
Side Effects :
- Gastrointestinal Effects: The most common side effects are gastrointestinal in nature and may include diarrhea, nausea, vomiting, and abdominal pain.
- Skin Reactions: Ivermectin can cause skin reactions such as rash, itching, and hives in some individuals.
- Dizziness and Fatigue: Some people may experience dizziness or fatigue after taking Ivermectin.
- Neurological Effects: In rare cases, Ivermectin can cause neurological symptoms such as dizziness, tremors, and confusion.
- Allergic Reactions: Although uncommon, severe allergic reactions to Ivermectin can occur. Symptoms may include swelling of the face, lips, tongue, or throat, difficulty breathing, and chest tightness.
Dosage :
Treatment of Parasitic Infections:
For intestinal worms (such as roundworms, threadworms): The typical dosage is a single oral dose of 150 to 200 micrograms per kilogram (mcg/kg) of body weight.For scabies: The usual dosage is a single oral dose of 200 mcg/kg or as directed by the healthcare provider.River Blindness (Onchocerciasis):
The standard dosage is a single oral dose of 150 to 200 mcg/kg. In endemic areas, treatment may be repeated every 3 to 12 months depending on the recommendations of healthcare authorities.Strongyloidiasis:
The recommended dosage is a single oral dose of 200 mcg/kg, repeated in 2 weeks if necessary.
FAQs :
1. What is Ivermectin used for?Ans. Ivermectin is primarily used to treat parasitic infections, including intestinal worms, scabies, and onchocerciasis (river blindness). It is also used in veterinary medicine for animals.
2. Can Ivermectin be used to treat COVID-19?Ans. While Ivermectin has shown some promise in laboratory studies against SARS-CoV-2, the virus that causes COVID-19, its effectiveness and safety for treating COVID-19 in humans are still under investigation. Current scientific evidence is insufficient to recommend Ivermectin as a treatment for COVID-19, and it should only be used under the guidance of a healthcare professional in approved indications.
3. Is Ivermectin safe?Ans. Ivermectin is generally considered safe when used at the recommended doses for approved indications. However, like any medication, it can have side effects. It's important to follow the prescribed dosage and consult with a healthcare professional before using Ivermectin.
4. Can Ivermectin be used in children?Ans. Yes, Ivermectin can be used in children, but the dosage and administration should be determined by a healthcare professional based on the child's age, weight, and specific condition.
Additional Information:
- Production Capacity: 1000
Ivecop 12mg Ivermectin Tablets
Minimum Order Quantity: 1 Strip of 10 Tablets
Product Brochure
Strength | 12mg |
Dosage | 12mg |
Packaging Type | Strip |
Manufacturer Name | Cipla |
Pack Size | Box |
Composition | Ivermectin 12mg Tablets |
Ivermectin is an antiparasitic medication that has gained attention for its potential therapeutic uses beyond its original intended purpose. It was first discovered in the 1970s and has since been used to treat a variety of parasitic infections in both humans and animals.
The drug works by targeting and disrupting the nervous system of parasites, leading to their paralysis and subsequent death. It is highly effective against a wide range of parasites, including certain types of worms, mites, and insects.
Uses :
- Treatment of Parasitic Infections
- River Blindness (Onchocerciasis)
- Strongyloidiasis
- Head Lice
- Animal Health
Side Effects :
- Gastrointestinal Effects: The most common side effects are gastrointestinal in nature and may include diarrhea, nausea, vomiting, and abdominal pain.
- Skin Reactions: Ivermectin can cause skin reactions such as rash, itching, and hives in some individuals.
- Dizziness and Fatigue: Some people may experience dizziness or fatigue after taking Ivermectin.
- Neurological Effects: In rare cases, Ivermectin can cause neurological symptoms such as dizziness, tremors, and confusion.
- Allergic Reactions: Although uncommon, severe allergic reactions to Ivermectin can occur. Symptoms may include swelling of the face, lips, tongue, or throat, difficulty breathing, and chest tightness.
Dosage :
Treatment of Parasitic Infections:
For intestinal worms (such as roundworms, threadworms): The typical dosage is a single oral dose of 150 to 200 micrograms per kilogram (mcg/kg) of body weight.For scabies: The usual dosage is a single oral dose of 200 mcg/kg or as directed by the healthcare provider.River Blindness (Onchocerciasis):
The standard dosage is a single oral dose of 150 to 200 mcg/kg. In endemic areas, treatment may be repeated every 3 to 12 months depending on the recommendations of healthcare authorities.Strongyloidiasis:
The recommended dosage is a single oral dose of 200 mcg/kg, repeated in 2 weeks if necessary.
FAQs :
1. What is Ivermectin used for?Ans. Ivermectin is primarily used to treat parasitic infections, including intestinal worms, scabies, and onchocerciasis (river blindness). It is also used in veterinary medicine for animals.
2. Can Ivermectin be used to treat COVID-19?Ans. While Ivermectin has shown some promise in laboratory studies against SARS-CoV-2, the virus that causes COVID-19, its effectiveness and safety for treating COVID-19 in humans are still under investigation. Current scientific evidence is insufficient to recommend Ivermectin as a treatment for COVID-19, and it should only be used under the guidance of a healthcare professional in approved indications.
3. Is Ivermectin safe?Ans. Ivermectin is generally considered safe when used at the recommended doses for approved indications. However, like any medication, it can have side effects. It's important to follow the prescribed dosage and consult with a healthcare professional before using Ivermectin.
4. Can Ivermectin be used in children?Ans. Yes, Ivermectin can be used in children, but the dosage and administration should be determined by a healthcare professional based on the child's age, weight, and specific condition.
Additional Information:
- Production Capacity: 1000
Cenforce 100mg Sildenafil Tablets
Minimum Order Quantity: 1 Box
Product Brochure
Strength | 100 mg |
Pack Size | 10 Tablets |
Brand | Cenforce 100mg Tablets |
Manufacturer | Centurion Laboratories |
From | Tablets |
Country of Origin | Made in India |
Introduction :
Sildenafil citrate is a medication used for the treatment of erectile dysfunction (ED) in adult men. It is the active ingredient in the well-known brand name medication Viagra. Sildenafil citrate belongs to a class of drugs called phosphodiesterase type 5 (PDE5) inhibitors.
Erectile dysfunction is a condition characterized by the inability to achieve or maintain an erection sufficient for sexual activity. It can be caused by various factors, such as age, underlying health conditions, psychological factors, or lifestyle choices. Sildenafil citrate works by inhibiting the enzyme PDE5, which allows for increased blood flow to the penis, facilitating the ability to achieve and maintain an erection.
Uses :
Sildenafil citrate works by inhibiting the enzyme phosphodiesterase type 5 (PDE5), which leads to increased blood flow to the penis. This increased blood flow helps to relax the smooth muscles in the penis, allowing for an erection to occur when sexual stimulation is present.
Here are the key uses of sildenafil citrate:
Erectile Dysfunction (ED): Sildenafil citrate is widely prescribed to treat erectile dysfunction. It helps men with ED achieve and maintain an erection that is suitable for sexual intercourse. It is important to note that sildenafil citrate does not cure the underlying causes of erectile dysfunction but provides temporary relief from the symptoms.
Pulmonary Arterial Hypertension (PAH): Sildenafil citrate is also used to treat pulmonary arterial hypertension, a condition characterized by high blood pressure in the arteries that supply the lungs.
Side Effects :
- Headache: One of the most common side effects is a headache, which may be mild to moderate in intensity.
- Flushing: Some individuals may experience flushing or a feeling of warmth and redness in the face, neck, or chest.
- Indigestion: Sildenafil citrate can cause indigestion, characterized by symptoms such as stomach discomfort, bloating, or acid reflux.
- Nasal congestion: It can cause a stuffy or runny nose.
- Visual disturbances: Some individuals may experience changes in color vision, blurred vision, or increased sensitivity to light.
-
Standard Dosage: The typical starting dose for most individuals is 50 milligrams (mg) of sildenafil citrate. This is usually taken approximately 1 hour before sexual activity.
FAQs:
1. What is sildenafil citrate used for?
Ans. Sildenafil citrate is primarily used for the treatment of erectile dysfunction (ED) in adult men. It helps to improve erectile function and enable men to achieve and maintain erections suitable for sexual activity.
2. How does sildenafil citrate work?
Ans. Sildenafil citrate belongs to a class of drugs called phosphodiesterase type 5 (PDE5) inhibitors. It works by inhibiting the enzyme PDE5, which relaxes the blood vessels in the penis, allowing for increased blood flow and the ability to achieve and sustain an erection.
3. How long does sildenafil citrate last?
Ans. The effects of sildenafil citrate typically last for about
4. Is sildenafil citrate a prescription medication?
Ans. Yes, sildenafil citrate is a prescription medication. It is important to consult with a healthcare professional to assess your medical history, current medications, and any underlying health conditions before using sildenafil citrate 4 to 6 hours.
Additional Information:
- Production Capacity: 1000
Kenacort 40mg Triamcinolone Injection
Product Brochure
Minimum Order Quantity | 1 Vial |
Composition | Triamcinolone 40mg Injection |
Treatment | used to treat allergic diseases, bad skin problems or arthritis |
Brand | Kenacort |
Manufacturer | Abbott |
Form | Injection |
Country of Origin | Made in India |
Kenacort 40mg is an injectable medication that contains the active ingredient Triamcinolone, which is a synthetic corticosteroid. Triamcinolone is widely used for its potent anti-inflammatory, immunosuppressive, and anti-allergic properties. This medication is available in the form of an injectable solution and is administered by healthcare professionals. Here's an introduction to Kenacort 40mg Triamcinolone Injection:
Uses:
nflammatory Joint Disorders:Kenacort is often used to treat inflammatory joint disorders such as rheumatoid arthritis and osteoarthritis.Intra-articular injections of Triamcinolone can help reduce inflammation and pain in affected joints.
Allergic Reactions:Triamcinolone may be administered to manage severe allergic reactions or anaphylaxis.It can help alleviate symptoms such as swelling, itching, and respiratory distress.
Dermatological Conditions:Kenacort is used in dermatology to treat various skin conditions, including dermatitis and psoriasis.Intralesional injections may be used for localized skin conditions.
Respiratory Conditions:For severe cases of asthma or allergic rhinitis, Triamcinolone injections may be recommended to reduce inflammation in the airways.
Side Effects:
- Weight gain.
- Fluid retention (edema).
- Elevated blood pressure.
- Changes in mood, such as irritability or mood swings.
- Thinning of the skin.
- Increased susceptibility to infections.
- Delayed wound healing.
Dosage:
Inflammatory Joint Disorders (e.g., Rheumatoid Arthritis):The typical dosage for intra-articular injection ranges from 2.5 mg to 40 mg, depending on the size and location of the joint.The frequency of injections may vary, with some patients requiring injections every few weeks or months.
Allergic Reactions or Anaphylaxis:In cases of severe allergic reactions, the dosage may vary but is often administered intramuscularly or intravenously.Dosages are determined based on the severity of the allergic response and the individual's overall health.
Dermatological Conditions (e.g., Dermatitis, Psoriasis):For localized skin conditions, intralesional injections are commonly used.The dosage depends on the size and severity of the skin lesion, with typical doses ranging from 2.5 mg to 10 mg.
Respiratory Conditions (e.g., Severe Asthma):Dosages for respiratory conditions can vary. In some cases, intramuscular or intravenous injections may be used.The dosage will depend on the severity of the respiratory condition and the individual patient's response.
FAQs:
1. What is Kenacort 40mg Triamcinolone Injection used for?Ans. Kenacort 40mg is used to treat various inflammatory conditions, allergic reactions, and autoimmune disorders. It is commonly used for conditions such as rheumatoid arthritis, osteoarthritis, dermatitis, asthma, and allergic rhinitis.
2. How is Kenacort 40mg administered?Ans. Kenacort 40mg is typically administered as an intramuscular (IM) injection or intra-articular injection, depending on the condition being treated. Healthcare professionals usually perform the injections in a clinical setting.
3. What is the recommended dosage of Kenacort 40mg?Ans. The dosage varies depending on the medical condition, its severity, and the patient's response. It is determined by a healthcare professional who considers individual factors before prescribing a specific dosage.
4. What are the common side effects of Kenacort 40mg Triamcinolone Injection?Ans. Common side effects may include temporary pain or swelling at the injection site. Less common side effects can include flushing, insomnia, increased appetite, nausea, and stomach upset. Prolonged use may lead to systemic side effects.
Additional Information:
- Production Capacity: 1000
Bendiff-IV Albendazole & Ivermectin Tablets
Product Brochure
Minimum Order Quantity | 1 Box |
Packaging Type | Box |
Dosage | Albendazole & Ivermectin Tablets |
Brand | Bendiff-IV Tablets |
Manufacturer | ELCLIFF FORMULATIONS |
Manufacturer Name | ELCLIFF FORMULATIONS |
Usages | Worm infection |
Side Effects | Headache, dizziness, nausea, stomach pain |
Bendiff-IV is a pharmaceutical formulation that combines two active ingredients, Albendazole and Ivermectin, in a convenient tablet form. This medication is designed to address parasitic infections in the human body.If "Bendiff-IV Albendazole & Ivermectin Tablets" is a medication, an introduction typically includes details such as the active ingredients, purpose of the medication, and relevant usage information.
Uses:
If "Bendiff-IV Albendazole & Ivermectin Tablets" combines Albendazole and Ivermectin, the medication is likely designed to address a broader spectrum of parasitic infections, offering a comprehensive treatment approach. The specific combination and formulation may be intended to enhance the efficacy against various parasites, including those affecting the gastrointestinal tract and other parts of the body.
Side Effects:
- Gastrointestinal disturbances (such as nausea, abdominal pain, diarrhea)
- Dizziness or lightheadedness
- Allergic reactions
- Changes in liver enzymes
- Neurological symptoms (rare but possible)
Dosage:
For Soil-Transmitted Helminthiasis:The typical dosage for adults and children over 2 years of age is a single oral dose of 400 mg.
For Neurocysticercosis:The dosage is usually 400 mg twice daily with meals.
For Echinococcosis:The dosage can vary but is often 400 mg twice daily with meals.
FAQs:
1. What is Bendiff-IV used for?Ans. This question aims to understand the primary purpose or indications for using the medication.
2. How do I take Bendiff-IV Albendazole & Ivermectin Tablets?Ans. Inquire about the recommended dosage, timing, and any specific instructions for taking the medication.
3. Are there any dietary restrictions or considerations while taking Bendiff-IV?Ans. Some medications may have specific instructions regarding food or other medications to avoid.
4. What should I do if I miss a dose of Bendiff-IV?Ans. Understanding the steps to take if a dose is missed is crucial for maintaining the effectiveness of the treatment.
Additional Information:
- Production Capacity: 1000
Vormid-Plus Albendazole & Ivermectin Tablets
Product Brochure
Minimum Order Quantity | 1 BoX |
Dosage | Vormid-Plus Tablets |
Brand | Vormid-Plus Tablets |
Manufacturer | Vibcare Pharma |
Manufacturer Name | Vibcare Pharma |
Prescription Required | Yes |
Composition (Salts) | Ivermectin and Albendazole |
Usages | Treatment of parasites and worm infestations in the body. |
Side Effects | Vomiting. Diarrhea. Loss of appetite. Increased liver enzymes. Itching. Swelling of lymph nodes. |
Vormid-Plus is a pharmaceutical formulation that combines two active ingredients, Albendazole and Ivermectin, in a convenient tablet form. This medication is designed to address parasitic infections in the human body.
Uses:
Broad-Spectrum Treatment:The combination of Albendazole and Ivermectin in Vormid-Plus may be designed to provide a comprehensive approach to treating various parasitic infections, including intestinal worms and certain systemic infections.
Enhanced Efficacy:The combination of these two medications may enhance the overall efficacy against a broader range of parasites.
Side Effects:
- Gastrointestinal disturbances (such as nausea, abdominal pain, diarrhea)
- Dizziness or lightheadedness
- Allergic reactions
- Changes in liver enzymes
- Neurological symptoms (rare but possible)
Dosage:
Albendazole:
For Intestinal Worm Infections:The typical dosage for adults and children over 2 years of age is a single oral dose of 400 mg.
For Hydatid Disease:The dosage is usually 400 mg twice daily with meals.
Ivermectin:
For Onchocerciasis (River Blindness):The typical dosage is a single oral dose based on body weight. The exact dosage is determined by the healthcare provider.
For Strongyloidiasis:The usual dosage is a single oral dose, but the exact amount will be determined by the healthcare provider.
FAQs:
1. What is Vormid-Plus used for?Ans. This question aims to understand the primary purpose or indications for using the medication.
2. How do I take Vormid-Plus Albendazole & Ivermectin Tablets?Ans. Inquire about the recommended dosage, timing, and any specific instructions for taking the medication.
3. Are there any dietary restrictions or considerations while taking Vormid-Plus?Ans. Some medications may have specific instructions regarding food or other medications to avoid.
4. What should I do if I miss a dose of Vormid-Plus?Ans. Understanding the steps to take if a dose is missed is crucial for maintaining the effectiveness of the treatment.
Additional Information:
- Production Capacity: 1000
Isoflurane Inhalation Anaesthetic Liquid
Minimum Order Quantity: 1 Bottle
Product Brochure
Brand | Isoflurane |
Packaging Type | Bottle |
Packaging Size | 250ml |
Usage | muscle relaxation and reduces pains |
Storage | 15-30 DegreeC |
Country of Origin | Made in India |
Isoflurane Inhalation Anesthetic Liquid is a medication used for general anesthesia during surgical and medical procedures. It belongs to the class of volatile inhalation anesthetics and is administered through inhalation to induce and maintain a controlled state of unconsciousness and muscle relaxation in patients undergoing various surgeries or interventions. Isoflurane is commonly used in operating rooms and medical settings to provide safe and effective anesthesia for patients of different ages and medical conditions.
Uses:
Surgical Procedures:Isoflurane is commonly used for both major and minor surgical procedures. It provides a deep and reversible state of unconsciousness, allowing surgeons to perform surgical interventions while the patient is pain-free and immobile.General Anesthesia:It is an essential component of general anesthesia, which is used to render patients completely unconscious and unresponsive to pain during surgery. General anesthesia allows for safe and controlled surgical procedures, from minor outpatient surgeries to complex major surgeries.Endotracheal Intubation and Mechanical Ventilation:Isoflurane is used to induce and maintain anesthesia during endotracheal intubation, where a tube is inserted into the trachea to provide a secure airway. Mechanical ventilation is then employed to support the patient's breathing while under anesthesia.Obstetric Procedures:In certain cases, isoflurane can be used for obstetric procedures, such as cesarean sections, to ensure pain relief and muscle relaxation.
Side Effect:
• Respiratory Depression• Hypotension• Arrhythmias• Nausea and Vomiting• Shivering• Coughing or Laryngospasm• Malignant Hyperthermia• Postoperative Cognitive Dysfunction (POCD)• Transient Hepatitis• Increased Intracranial Pressure• Allergic Reactions
Dosages:
Dosing Guidelines:Dosages are typically expressed as a concentration of isoflurane in the inspired air.Dosages are carefully titrated to achieve the desired level of anesthesia for each patient.
Specific Dosages:Induction of Anesthesia: Initial concentrations of isoflurane are often around 1% to 2% (1 to 2 parts per 100) to induce anesthesia rapidly.Maintenance of Anesthesia: Concentrations are adjusted to maintain the desired depth of anesthesia during the surgical procedure. Typical maintenance concentrations range from 0.5% to 3%.
FAQs:
1. What is Isoflurane Inhalation Anesthetic Liquid?Ans. Isoflurane Inhalation Anesthetic Liquid is a medication used for general anesthesia during surgical and medical procedures. It is administered through inhalation to induce and maintain a controlled state of unconsciousness and muscle relaxation.
2. How does isoflurane work as an anesthetic?Ans. Isoflurane enhances the inhibitory actions of neurotransmitters, leading to depression of neuronal activity in the central nervous system. This results in a state of general anesthesia, where the patient is unconscious, insensitive to pain, and relaxed.
3. What types of procedures is isoflurane used for?Ans. Isoflurane is used for a wide range of surgical procedures, including major surgeries (e.g., open-heart surgery), minor surgeries (e.g., dental procedures), obstetric procedures (e.g., cesarean sections), orthopedic surgeries, neurosurgery, and more.
4. Who administers isoflurane anesthesia?Ans. Isoflurane anesthesia is administered by trained anesthesia professionals, such as anesthesiologists or nurse anesthetists, who specialize in monitoring and managing patients under anesthesia.
Additional Information:
- Production Capacity: 1000
Viropil Dolutegravir, Lamivudine, Tenofovir Disoproxil & Fumarate Tablets
Minimum Order Quantity: 1 Bottle
Product Brochure
Packaging Size | 90 tablets |
Composition | Dolutegravir, Lamivudine, Tenofovir disoproxil & Fumarate Tablets |
Treatment | HIV |
Prescription/Non prescription | Prescription |
Form | Tablet |
Country of Origin | Made in India |
Dolutegravir: Dolutegravir is an integrase strand transfer inhibitor (INSTI) that blocks the action of the integrase enzyme. This enzyme is essential for the replication of the HIV virus, and by inhibiting it, Dolutegravir helps prevent the virus from multiplying and spreading in the body.Lamivudine: Lamivudine is a nucleoside reverse transcriptase inhibitor (NRTI) that works by interfering with the reverse transcriptase enzyme. Reverse transcriptase is crucial for the replication of the HIV virus, and Lamivudine helps to inhibit this enzyme, reducing the viral load in the body.Tenofovir Disoproxil Fumarate (TDF): Tenofovir is also an NRTI that works similarly to Lamivudine by blocking the reverse transcriptase enzyme. Tenofovir Disoproxil Fumarate is a prodrug of Tenofovir, meaning it gets converted into its active form (Tenofovir) inside the body. This active form helps to suppress the replication of HIV and decrease the viral load.
Uses:
Treatment of HIV-1 Infection: Viropil is prescribed as a part of combination antiretroviral therapy (ART) to manage HIV-1 infection. The three active ingredients in Viropil work together to target different stages of the HIV lifecycle, reducing the viral load in the body and slowing down the progression of the disease.Viral Suppression: The primary goal of HIV treatment is to achieve viral suppression, which means reducing the amount of HIV in the bloodstream to undetectable levels. Viropil's combination of Dolutegravir, Lamivudine, and Tenofovir Disoproxil Fumarate is highly effective in achieving and maintaining viral suppression.Improved Immune Function: By controlling the HIV virus and reducing its replication, Viropil helps to preserve and improve the immune system's function. This allows the immune system to better defend the body against opportunistic infections and other complications associated with HIV.Prevention of Transmission: When taken consistently and as prescribed, Viropil can significantly reduce the risk of HIV transmission to sexual partners. Achieving and maintaining an undetectable viral load (Undetectable = Untransmittable, U=U) has been shown to greatly diminish the risk of transmitting the virus.
Side Effects:
• Gastrointestinal Issues• Dizziness• Headache• Insomnia or Sleep Disturbances• Rash• Elevated Liver Enzymes• Changes in Bone Density• Changes in Kidney Function• Changes in Blood Cell Counts• Lipodystrophy
Dosage:
Please note that dosages can vary based on individual factors such as age, weight, kidney function, and other medical conditions. It is essential to follow the exact dosage and instructions provided by your healthcare provider or pharmacist for your specific situation. They will be able to give you the most accurate and up-to-date information tailored to your needs.
FAQs:
1. What is Viropil used for?
Ans. Viropil is used to treat HIV (human immunodeficiency virus) infection in adults. It is a combination of antiretroviral drugs that work together to suppress the virus and reduce its replication, helping to control the infection and improve the immune system's function.
2. How should I take Viropil tablets?
Ans. Viropil tablets are usually taken orally once daily with or without food. It is essential to take the medication consistently and as prescribed by your healthcare provider to ensure its effectiveness.
3. Are there any possible side effects of Viropil?
Ans. Like all medications, Viropil may have side effects. Common side effects may include nausea, diarrhea, headache, fatigue, and dizziness. Some individuals may experience more severe reactions or allergic responses. If you experience any unusual or severe side effects, contact your healthcare provider immediately.
Additional Information:
- Production Capacity: 1000
Tenohep Tenofovir Disoproxil Fumarate Tablet
Minimum Order Quantity: 1 Bottle
Product Brochure
Dose/Strength | 300 mg |
Packaging Size | 10 tablets |
Composition | Tenofovir Disoproxil Fumarate Tablet |
Manufacturer | Zydus Heptiza |
Form | Tablet |
Country of Origin | Made in India |
Tenohep Tenofovir Disoproxil Fumarate Tablet is a pharmaceutical product used in the management of human immunodeficiency virus (HIV) infection and hepatitis B virus (HBV) infection. The active ingredient in Tenohep is tenofovir disoproxil fumarate, a nucleotide reverse transcriptase inhibitor (NRTI). This medication plays a critical role in inhibiting the replication of these viruses and is an essential component of antiretroviral therapy (ART) regimens. Here is an introduction to Tenohep Tenofovir Disoproxil Fumarate Tablet
Uses:
Treatment of HIV Infection:Tenohep Tenofovir Disoproxil Fumarate Tablet is a crucial component of combination antiretroviral therapy (ART) for the treatment of HIV infection. It is prescribed to both treatment-naïve individuals (those who have not received HIV treatment before) and treatment-experienced individuals (those who have received prior HIV therapy). The medication works by inhibiting the reverse transcriptase enzyme, which is essential for HIV replication. By blocking this enzyme, Tenohep helps reduce viral load, slow down disease progression, and improve immune function.
Management of Chronic Hepatitis B (HBV) Infection:Tenohep is also used to treat chronic hepatitis B virus (HBV) infection. Chronic HBV infection can lead to liver damage, cirrhosis, and other serious complications. Tenohep helps suppress viral replication in individuals with chronic HBV, thereby reducing the risk of liver inflammation and damage. Regular monitoring of liver function is important during the treatment of chronic HBV.
Prevention of Vertical Transmission:In pregnant individuals with HIV or chronic HBV, Tenohep Tenofovir Disoproxil Fumarate Tablet may be used as part of a regimen to reduce the risk of transmitting the virus to the unborn child.
Reduction of Transmission Risk:Tenohep, when used as part of HIV treatment, can lower the viral load in the blood, reducing the risk of transmitting the virus to sexual partners.
Side Effect:
• Nausea• Diarrhea• Fatigue• Headache• Dizziness• Abdominal pain or discomfort• Vomiting• Muscle pain
Dosages:
For Treatment of HIV Infection:The recommended dosage of Tenohep Tenofovir Disoproxil Fumarate Tablet for the treatment of HIV infection can vary based on the patient's treatment history and other factors. It is often used in combination with other antiretroviral medications. Common dosages may include 300 mg tenofovir disoproxil fumarate once daily.
For Treatment of Chronic Hepatitis B (HBV) Infection:The dosage of Tenohep for chronic HBV infection may vary based on the patient's condition. Common dosages may include 300 mg tenofovir disoproxil fumarate once daily.
FAQs:
1. What is Tenohep Tenofovir Disoproxil Fumarate Tablet?Ans. Tenohep is a medication containing the active ingredient tenofovir disoproxil fumarate. It is used to treat both human immunodeficiency virus (HIV) infection and chronic hepatitis B virus (HBV) infection.
2. How does Tenohep work?Ans. Tenohep inhibits the reverse transcriptase enzyme, which is crucial for the replication of HIV and HBV. By blocking this enzyme, the medication reduces viral replication, lowers viral load, and helps control the progression of these infections.
3. What are the main uses of Tenohep?Ans. Tenohep is used for the treatment of HIV infection in both treatment-naïve and treatment-experienced individuals, as well as for the management of chronic HBV infection.
4. Is Tenohep used alone or in combination with other medications?Ans. Tenohep can be used as part of a combination antiretroviral therapy (ART) regimen for HIV treatment. It may also be used as monotherapy for chronic HBV infection.
Additional Information:
- Production Capacity: 1000
Teravir Tenofovir Disoproxil Fumarate (300mg) Tablet
Minimum Order Quantity: 1 Bottle
Product Brochure
Dose/Strength | 300 mg |
Packaging Size | 1*30 |
Composition | Tenofovir Disoproxil Fumarate (300mg) Tablet |
Packaging Type | Box |
Form | Tablet |
Country of Origin | Made in India |
Teravir (Tenofovir Disoproxil Fumarate) 300mg tablet is a prescription medication commonly used in the management of human immunodeficiency virus (HIV) infection and hepatitis B virus (HBV) infection. It belongs to a class of drugs called nucleotide reverse transcriptase inhibitors (NRTIs) that work by interfering with the replication process of the viruses. Here's an introduction to Teravir and its uses
Uses:
HIV Infection Treatment:Teravir is utilized as part of combination therapy for the treatment of HIV-1 infection in adults and pediatric patients weighing at least 17 kg. It plays a crucial role in suppressing viral replication, reducing the viral load, and slowing down the progression of HIV disease. By inhibiting the reverse transcriptase enzyme, Teravir helps control the virus and improve immune function, thereby enhancing the patient's overall health and quality of life.Chronic Hepatitis B Treatment:Teravir is also indicated for the treatment of chronic hepatitis B virus (HBV) infection in adults. It helps lower HBV DNA levels, improve liver function, and reduce the risk of complications associated with chronic hepatitis B. By inhibiting the replication of the hepatitis B virus, Teravir contributes to better management of the disease and its potential long-term effects on the liver.
Side Effect:
• Nausea• Diarrhea• Vomiting• Headache• Dizziness• Fatigue• Changes in kidney function tests• Abdominal pain or discomfort• Flatulence (excessive gas)• Skin rash or itching• Insomnia (difficulty sleeping)• Muscle or joint pain
Dosages:
HIV Infection:For the treatment of HIV-1 infection in adults and pediatric patients weighing at least 17 kg, the typical dosage is one 300mg tablet of Teravir once daily, taken orally with or without food. Teravir is often used in combination with other antiretroviral medications to form a comprehensive treatment regimen.Chronic Hepatitis B:For the treatment of chronic hepatitis B virus (HBV) infection in adults, the recommended dosage is one 300mg tablet of Teravir once daily, taken orally with or without food. This regimen helps lower HBV DNA levels and improve liver function.
FAQs:
1. What is Teravir?Ans. Teravir is a prescription medication used in the treatment of human immunodeficiency virus (HIV) infection and chronic hepatitis B virus (HBV) infection.
2. How does Teravir work?Ans. Teravir belongs to a class of drugs called nucleotide reverse transcriptase inhibitors (NRTIs). It interferes with the replication process of the viruses, inhibiting their ability to multiply and reducing their viral load.
3. What conditions is Teravir used to treat?Ans. Teravir is used to treat HIV-1 infection in adults and pediatric patients weighing at least 17 kg. It is also indicated for the treatment of chronic hepatitis B in adults.
4. How is Teravir taken?Ans. Teravir is typically taken orally as a single daily dose, with or without food. The dosage and administration instructions will be provided by your healthcare provider.
Additional Information:
- Production Capacity: 1000
Tafero Emtricitabine (200mg) & Tenofovir disoproxil fumarate (25mg) Tablets
Minimum Order Quantity: 1 Bottle
Product Brochure
Dose/Strength | 300 mg |
Packaging Size | 30 |
Composition | Emtricitabine (200mg) & Tenofovir disoproxil fumarate (25mg) Tablets |
Packaging Type | Box |
Form | Tablet |
Country of Origin | Made in India |
Tafero EM Tablet is not a cure for HIV/AIDS and only helps to decrease the amount of HIV in your body. This helps to lower your risk of getting HIV-related complications and improves your lifespan. It may also be used to prevent HIV infection in some people at high risk. It may be prescribed alone or in combination with other HIV medicines. Your doctor will recommend the best medicines for you and will decide the doses that you need. Follow carefully the instructions for all the medicines that you are given. This medicine is best taken with food. Taking these medicines regularly at the right time greatly increases their effectiveness and reduces the chances of HIV becoming resistant to them. It is important not to miss doses and to keep taking them until your doctor tells you it is safe to stop.
Additional Information:
- Production Capacity: 1000
Xapavir Tenofovir 300, Lamivudine 300 & Dolutegravir 50 Tablets
Minimum Order Quantity: 1 Bottle
Product Brochure
Dose/Strength | 300 mg |
Packaging Size | 1*30 |
Composition | Tenofovir 300, Lamivudine 300 & Dolutegravir 50 Tablets |
Treatment | HIV |
Packaging Type | Box |
Country of Origin | Made in India |
Tenofovir disoproxil fumarate (TDF): Tenofovir is an antiviral medication from the nucleotide reverse transcriptase inhibitor (NRTI) class. It works by inhibiting the activity of the enzyme reverse transcriptase, which is essential for the replication of the HIV virus. By interfering with the viral replication process, Tenofovir helps reduce the viral load in the blood, slowing down the progression of HIV infection.Lamivudine: Lamivudine is also an antiviral medication classified as a nucleoside reverse transcriptase inhibitor (NRTI). Similar to Tenofovir, Lamivudine inhibits the reverse transcriptase enzyme, preventing the virus from multiplying and reducing the viral load.Dolutegravir: Dolutegravir is an antiretroviral from the integrase strand transfer inhibitor (INSTI) class. It blocks the integrase enzyme, which is responsible for inserting the viral DNA into the host cell's DNA. By inhibiting this process, Dolutegravir prevents the virus from replicating further and helps control HIV infection.
Uses:
Treatment of HIV-1 Infection: Xapavir is prescribed for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in individuals aged 12 years and older, weighing at least 40 kg (approximately 88 pounds). It is used to control the replication of the HIV virus and reduce the viral load in the blood, thereby slowing down the progression of the disease and preserving immune function.Antiretroviral Therapy (ART): Xapavir is an essential component of antiretroviral therapy, which is the standard treatment approach for HIV infection. ART involves the use of multiple antiretroviral medications, including Xapavir, to suppress the virus and maintain the immune system's health.
Side Effects:
• Headache• Nausea or upset stomach• Diarrhea• Fatigue or weakness• Insomnia (difficulty sleeping)• Dizziness or lightheadedness• Rash or skin reactions• Changes in liver function tests
Dosage:
As an AI language model, I must clarify that I am not a licensed medical professional, and I cannot provide personalized medical advice or prescribe medications. Dosage instructions for any medication should always be obtained from a qualified healthcare professional who can consider your individual health condition, medical history, and other factors.If you have been prescribed Xapavir, which is a combination medication containing Tenofovir 300 mg, Lamivudine 300 mg, and Dolutegravir 50 mg, it is crucial to follow your doctor's instructions precisely.Typically, the recommended dosage for Xapavir is one tablet per day, taken orally. However, dosing can vary depending on the specific condition being treated and the patient's individual health characteristics.
FAQs:
1. What is Xapavir?Ans. Xapavir is a medication that combines three active ingredients: Tenofovir 300 mg, Lamivudine 300 mg, and Dolutegravir 50 mg. It is used in the treatment of HIV-1 infection in adults and children above a certain age and weight.
2. How does Xapavir work?Ans. Xapavir works by inhibiting different stages of the HIV-1 virus replication cycle. Tenofovir and Lamivudine are nucleoside reverse transcriptase inhibitors (NRTIs) that block the action of the HIV-1 reverse transcriptase enzyme, preventing the virus from replicating its genetic material. Dolutegravir is an integrase inhibitor that blocks the action of the HIV-1 integrase enzyme, preventing the virus from integrating its genetic material into the host cell's DNA.
3. What is Xapavir used for?Ans. Xapavir is used to treat HIV-1 infection in adults and pediatric patients who weigh a certain amount, and who have not previously taken HIV medications or are virologically suppressed on their current antiretroviral therapy.
Additional Information:
- Production Capacity: 1000
Hepcvir Sofosbuvir 400mg Tablets
Minimum Order Quantity: 1 Bottle
Product Brochure
Composition | Sofosbuvir 400mg Tablets |
Brand | Hepcvir |
Packaging Size | 1*15 |
Packaging Type | box |
Form | Tablet |
Manufacturer | Cipla Ltd |
Country of Origin | Made in India |
Hepcvir Sofosbuvir 400mg Tablets are a medication used in the treatment of chronic hepatitis C virus (HCV) infection. Sofosbuvir, the active ingredient in Hepcvir tablets, is a direct-acting antiviral (DAA) agent that targets specific enzymes involved in the replication of the hepatitis C virus. These tablets are a significant advancement in the management of HCV infection and are often used as part of combination antiviral therapy. Here's an introduction to Hepcvir Sofosbuvir 400mg Tablets
Uses:
Treatment of Chronic Hepatitis C Infection:Hepcvir Sofosbuvir 400mg Tablets are prescribed to individuals with chronic hepatitis C infection, targeting specific genotypes of the virus. They are used in combination with other antiviral agents to achieve sustained virological response (SVR), which indicates successful eradication of the virus from the body.
Genotype-Specific Treatment:Hepcvir Sofosbuvir 400mg Tablets are effective against multiple genotypes of HCV, making them suitable for a broad range of patients. Different genotypes of HCV respond differently to treatment, and healthcare providers will determine the most appropriate regimen based on the patient's genotype.
Prevention of Liver Complications:Successful treatment with Hepcvir Sofosbuvir 400mg Tablets can help prevent or reduce the risk of liver complications associated with chronic HCV infection, such as cirrhosis, hepatocellular carcinoma (liver cancer), and liver failure.
Improved Quality of Life:By achieving SVR and effectively suppressing the virus, Hepcvir Sofosbuvir 400mg Tablets can lead to improved liver health, reduced symptoms, and an overall better quality of life for individuals living with chronic HCV infection.
Side Effect:
• Fatigue or tiredness• Headache• Nausea• Diarrhea• Insomnia (difficulty sleeping)• Itchy skin (pruritus)• Decreased appetite• Muscle or joint pain• Rash
Dosages:
Recommended Dosage:The typical dosage of Hepcvir Sofosbuvir 400mg Tablets is one tablet taken orally once daily.The tablets can be taken with or without food.
Combination Therapy:Hepcvir Sofosbuvir 400mg Tablets are often used in combination with other antiviral medications, such as ribavirin, ledipasvir, or velpatasvir, depending on the patient's HCV genotype and specific treatment plan.
Treatment Duration:The duration of treatment can vary based on factors such as the HCV genotype, treatment history, and individual patient characteristics.Your healthcare provider will determine the appropriate duration of treatment based on your specific circumstances.
Adjustments and Monitoring:Dosing adjustments may be necessary based on factors such as kidney function, liver function, and potential drug interactions.Regular monitoring of viral load and liver function is important to assess the effectiveness of the treatment.
FAQs:
1. What is Hepcvir Sofosbuvir 400mg Tablets used for?Ans. Hepcvir Sofosbuvir 400mg Tablets are used for the treatment of chronic hepatitis C virus (HCV) infection. They are part of a combination antiviral therapy aimed at suppressing the virus and achieving sustained virological response (SVR).
2. How does Hepcvir Sofosbuvir 400mg Tablets work?Ans. Sofosbuvir, the active ingredient in Hepcvir, is a direct-acting antiviral (DAA) that inhibits an enzyme necessary for HCV replication. By blocking this enzyme, the medication helps reduce the viral load and prevent the virus from multiplying.
3. Can Hepcvir Sofosbuvir 400mg Tablets cure hepatitis C?Ans. Hepcvir Sofosbuvir 400mg Tablets, when used as part of a comprehensive antiviral regimen, can lead to a sustained virological response (SVR), which is considered a cure for hepatitis C. SVR indicates that the virus is undetectable in the blood six months after completing treatment.
Additional Information:
- Production Capacity: 1000
Daruvir 300 mg Tablets
Minimum Order Quantity: 1 Bottle
Product Brochure
Strength | 300 mg |
Packaging Size | 1*60 |
Pack Size | 1*60 Tablet |
Composition | Daruvir 300 mg |
Pack Type | Box |
Form | Tablet |
Country of Origin | Made in India |
Daruvir 300 mg Tablets, also known by the generic name Darunavir, are a type of antiretroviral medication used in the treatment of human immunodeficiency virus (HIV) infection. Darunavir belongs to the class of drugs known as protease inhibitors, which work by inhibiting an enzyme called protease that is essential for the replication of HIV. This medication is an important component of combination antiretroviral therapy (ART) that helps manage HIV infection and improve the overall health and well-being of individuals living with the virus.
Uses:
Treatment of HIV Infection:Daruvir 300 mg Tablets are prescribed to individuals who have been diagnosed with HIV infection. They are an essential component of combination ART, which typically includes multiple antiretroviral medications from different classes. This combination therapy is aimed at suppressing HIV replication, reducing the viral load, and slowing down the progression of the disease.
Improved Immune Function:By effectively suppressing HIV replication, Daruvir helps prevent further damage to the immune system and allows CD4+ T-cell counts to increase. This, in turn, helps strengthen the immune response and reduces the risk of opportunistic infections and complications associated with advanced HIV disease.
Prevention of Disease Progression:Daruvir 300 mg Tablets, when used as directed and in combination with other appropriate medications, can help delay the progression of HIV infection to more advanced stages, such as acquired immunodeficiency syndrome (AIDS).
Side Effect:
• Nausea• Diarrhea• Abdominal discomfort• Headache• Fatigue• Rash• Vomiting• Gas or bloating• Changes in taste sensation
Dosages:
The typical dosage of Daruvir 300 mg Tablets for adults is 800 mg (two tablets) taken once daily.The tablets can be taken with or without food.In some cases, Daruvir may be used in combination with a pharmacokinetic enhancer, such as ritonavir, to increase its concentration in the blood. This boosting agent allows for reduced dosing frequency.
FAQs:
1. What is Daruvir 300 mg Tablets used for?Ans. Daruvir 300 mg Tablets are used as part of combination antiretroviral therapy (ART) for the treatment of human immunodeficiency virus (HIV) infection. They help suppress HIV replication, improve immune function, and manage the progression of the disease.
2. How does Daruvir work?Ans. Daruvir is a protease inhibitor that works by blocking the activity of the HIV protease enzyme. This inhibition prevents the virus from effectively assembling new viral particles, reducing viral load, and slowing down disease progression.
3. Is Daruvir a cure for HIV?Ans. No, Daruvir is not a cure for HIV. It helps control the virus by suppressing its replication and reducing viral load. Achieving an undetectable viral load through treatment can improve health and reduce the risk of transmission, but ongoing treatment is generally necessary.
4. How is Daruvir 300 mg Tablets dosed?Ans. The typical dosage is 800 mg (two tablets) taken once daily. The tablets can be taken with or without food. Consult your healthcare provider for personalized dosing instructions.
Additional Information:
- Production Capacity: 1000
Hepcvir L Ledipasvir (90mg) & Sofosbuvir (400mg) Tablets
Minimum Order Quantity: 1 Bottle
Product Brochure
Dose/Strength | 90 mg |
Composition | Ledipasvir (90mg) & Sofosbuvir (400mg) Tablets |
Brand | Hepcvir L |
Packaging Size | 1*28 |
Form | Tablet |
Manufacturer | Cipla Ltd |
Country of Origin | Made in India |
Hepcvir L Tablets contain a combination of two active ingredients: Ledipasvir (90mg) and Sofosbuvir (400mg). This combination medication is used in the treatment of chronic hepatitis C virus (HCV) infection. Ledipasvir and Sofosbuvir are both direct-acting antiviral (DAA) agents that work together to target different stages of the HCV lifecycle. This combination therapy is effective in suppressing viral replication, reducing viral load, and improving liver health in individuals with chronic hepatitis C.
Uses:
Treatment of Chronic Hepatitis C Virus (HCV) Infection:Hepcvir L Tablets are indicated for the treatment of chronic HCV infection in adults. They are used to target specific genotypes of the virus, including genotypes 1, 4, 5, and 6.
High Sustained Virological Response (SVR) Rates:Hepcvir L combination therapy is associated with high rates of sustained virological response (SVR), which represents the successful eradication of the HCV virus from the body. Achieving SVR is a key indicator of treatment success and a functional cure for hepatitis C.
Suppression of Viral Replication:The dual-action mechanism of Ledipasvir and Sofosbuvir works to inhibit different stages of the HCV lifecycle, effectively suppressing viral replication and reducing viral load in the body.
Improved Liver Health:By reducing viral load and halting the progression of the virus, Hepcvir L Tablets contribute to improved liver health and function. Successful treatment can lead to a reduction in liver inflammation and the prevention of further liver damage.
Side Effect:
• Headache• Fatigue• Nausea• Diarrhea• Insomnia (difficulty sleeping)• Itching or rash• Muscle or joint pain• Decreased appetite• Mild to moderate cough
Dosages:
Adult Dosage:The typical adult dosage of Hepcvir L is one tablet (Ledipasvir 90mg & Sofosbuvir 400mg) taken orally once daily with or without food.
Treatment Duration:The treatment duration with Hepcvir L Tablets can vary based on the specific HCV genotype being treated, previous treatment history, and other individual factors.Your healthcare provider will determine the appropriate treatment duration for your situation.
Combination Therapy:Hepcvir L Tablets are often used in combination with other antiretroviral medications to create an effective and comprehensive treatment regimen for chronic hepatitis C.
Important Considerations:Adherence to the prescribed dosing schedule is crucial for the effectiveness of the treatment and to achieve optimal treatment outcomes.Regular monitoring and follow-up with your healthcare provider are important to assess treatment response and adjust the regimen if needed.
FAQs:
1. What is Hepcvir L Tablets used for?Ans. Hepcvir L Tablets are used for the treatment of chronic hepatitis C virus (HCV) infection in adults. They contain a combination of Ledipasvir and Sofosbuvir, which work together to suppress viral replication and improve liver health.
2. How does Hepcvir L work to treat HCV infection?Ans. Hepcvir L combines two direct-acting antiviral agents, Ledipasvir and Sofosbuvir. Ledipasvir inhibits viral replication by targeting the NS5A protein, while Sofosbuvir interferes with the virus's RNA polymerase, preventing its replication.
3. Can Hepcvir L cure hepatitis C?Ans. Successful treatment with Hepcvir L can lead to sustained virological response (SVR), which is considered a functional cure for hepatitis C. SVR indicates that the virus is undetectable in the blood six months after completing treatment.
4. How long does treatment with Hepcvir L last?Ans. The duration of treatment with Hepcvir L varies depending on factors such as HCV genotype, previous treatment history, and individual patient characteristics. Your healthcare provider will determine the appropriate treatment duration.
Additional Information:
- Production Capacity: 1000
Degatide Degarelix 120mg Injection
Minimum Order Quantity: 1 Piece
Product Brochure
Dosage Form | 80 mg |
Packaging | 80 & 120mg |
Brand | Deghor |
Manufacturer | Glenmark |
Strength | 80 mg |
Prescription/Non prescription | Prescription |
Composition | Degarelix |
Country of Origin | Made in India |
Degarelix injection is a medication used in the treatment of advanced prostate cancer. It belongs to a class of drugs known as gonadotropin-releasing hormone (GnRH) receptor antagonists. Degarelix works by suppressing the production of testosterone, a hormone that fuels the growth of prostate cancer cells. By reducing testosterone levels, Degarelix helps to slow down the progression of advanced prostate cancer.
Uses:
Advanced Prostate Cancer: Degarelix is used to treat advanced prostate cancer in adult men. This includes cases where the cancer has spread beyond the prostate gland (metastatic prostate cancer) or cases where local treatments like surgery or radiation therapy are not appropriate or have not been successful.Androgen Deprivation Therapy (ADT): Degarelix is a form of androgen deprivation therapy, which aims to reduce the levels of androgens (male hormones), particularly testosterone. By lowering testosterone levels, Degarelix helps slow down the growth and spread of prostate cancer cells.Androgen-Sensitive Prostate Cancer: Prostate cancer cells often rely on testosterone for their growth. Degarelix works by quickly reducing testosterone levels, which in turn deprives the cancer cells of the hormones they need to thrive.
Side Effects:
• Hot flashes• Injection-site reactions (pain, swelling, redness)• Fatigue• Decreased libido (sex drive)• Increased levels of liver enzymes• Increased levels of creatine phosphokinase (CPK)• Joint pain
Dosages:
Initial Dose: The initial recommended dose of Degarelix is usually a loading dose, given as a subcutaneous injection. This loading dose helps to rapidly reduce testosterone levels. After the initial loading dose, maintenance doses are administered.Maintenance Dose: Following the loading dose, maintenance doses of Degarelix are given on a regular schedule, often monthly. The specific dosing interval may vary based on individual response and treatment plan.Dosage Adjustment: Your healthcare provider will monitor your response to treatment through regular blood tests, including measuring your testosterone levels. They may adjust the dosage based on the levels of testosterone and your overall health.Injection Site: Degarelix is typically injected into the fatty tissue just under the skin (subcutaneously), often in the abdominal area.
FAQs:
1. What is Degarelix injection used for?Ans. Degarelix is used to treat advanced prostate cancer by lowering testosterone levels, which slows down the growth of cancer cells.
2. How does Degarelix work?Ans. Degarelix is a GnRH receptor antagonist that rapidly reduces testosterone levels by blocking signals that stimulate its production.
3. What are the benefits of using Degarelix?Ans. Degarelix offers rapid testosterone suppression without the initial testosterone surge seen with other treatments, helping to prevent tumor flare reactions.
4. How is Degarelix administered?Ans. Degarelix is given as a subcutaneous injection, usually into the abdominal area.
5. How often is Degarelix injected?Ans. After an initial loading dose, maintenance doses are typically administered monthly. The dosing schedule may vary based on individual response.
Additional Information:
- Production Capacity: 1000
Methylene Blue Injection Usp
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Bluejet |
Composition | Methylene blue |
Injectable Form | Liquid |
Packaging Size | 10ml*10 Ampoules |
Treatment | Methemoglobinemia |
Country of Origin | Made in India |
Introduction:
Methylene Blue Injection USP is a medication that contains the active ingredient methylene blue, which is a synthetic dye with various medical applications. It is used in a clinical and healthcare setting for specific diagnostic and therapeutic purposes. Methylene Blue is administered intravenously (through a vein) and plays a role in certain medical procedures and conditions. Here is an introduction to Methylene Blue Injection USP
Uses:
Diagnostic Tool in Surgery and Procedures: Methylene Blue is often used as a dye or stain to enhance visualization of certain anatomical structures and aid surgeons or medical professionals during procedures. It can be used to trace the path of fluids, identify specific tissues, or detect leaks in various surgical and diagnostic settings.
Methemoglobinemia Treatment: Methylene Blue is a vital antidote for methemoglobinemia, a condition where hemoglobin is unable to carry oxygen effectively. By promoting the conversion of methemoglobin to its oxygen-carrying form (hemoglobin), Methylene Blue helps restore normal oxygen transport in the blood.
Cyanide Poisoning Treatment: Methylene Blue can be used as part of the treatment regimen for cyanide poisoning. It acts by facilitating the conversion of cyanide ions into a less toxic compound, thiocyanate.
Antiseptic and Antibacterial Agent: Methylene Blue has antimicrobial properties and can be used as a topical antiseptic to prevent infection. It is sometimes applied to wounds or used in combination with light therapy to treat certain skin infections.
Side Effects:
• Injection site reactions (pain, discomfort, swelling)
• Blue-green discoloration of urine
• Allergic reactions (rash, itching, hives, swelling)
• Nausea and vomiting
• Headache
• Dizziness or lightheadedness
• Low blood pressure
• Serotonin syndrome (confusion, rapid heart rate, fever, agitation)
• Methemoglobinemia (reduced blood oxygen-carrying capacity)
• Hemolysis (destruction of red blood cells), particularly in those with glucose-6-phosphate dehydrogenase (G6PD) deficiency
Dosages:
Methemoglobinemia Treatment:
For the treatment of methemoglobinemia, the dosage of Methylene Blue Injection is often based on the patient's weight.
A typical dosage for methemoglobinemia may range from 1 to 2 mg/kg of body weight. However, the exact dosage may vary depending on the severity of the condition and the healthcare provider's recommendations.
Dosage frequency and duration of treatment will also depend on the patient's response to the initial dose.
FAQs:
1. What is Methylene Blue Injection USP?
Ans. Methylene Blue Injection USP is a medication containing methylene blue, a synthetic dye with various medical applications. It is administered intravenously and is used for diagnostic and therapeutic purposes in medical procedures.
2. What is Methylene Blue used for?
Ans. Methylene Blue is used for various purposes, including treating methemoglobinemia (a blood disorder), aiding in certain surgical and diagnostic procedures, treating cyanide poisoning, and as a potential component of photodynamic therapy.
3. How is Methylene Blue Injection administered?
Ans. Methylene Blue Injection is typically administered by qualified healthcare professionals intravenously. The dosage and administration protocol vary depending on the specific medical condition and the healthcare provider's recommendations.
Additional Information:
- Production Capacity: 1000
Femistra Anastrozole Tablet
Minimum Order Quantity: 1 Stripe
Product Brochure
Strength | 1 mg |
Packaging Size | 1*10 Tablets |
Brand | Femistra |
Usage/Application | Hospital |
Composition | Anastrozole Tablet |
Form | Tablet |
Country of Origin | Made in India |
Femistra (Anastrozole Tablet) is a medication used in the treatment of hormone receptor-positive breast cancer in postmenopausal women. It belongs to a class of drugs known as aromatase inhibitors, which work by reducing the production of estrogen in the body. Estrogen fuels the growth of hormone receptor-positive breast cancer, and by lowering its levels, Femistra helps slow down or inhibit the growth of cancer cells.
Uses:
Adjuvant Treatment of Early-Stage Breast Cancer:Femistra is commonly used as adjuvant therapy for early-stage hormone receptor-positive breast cancer in postmenopausal women. It is given following primary treatments like surgery, chemotherapy, or radiation to lower the risk of cancer recurrence.
Hormone Receptor-Positive Breast Cancer:Femistra is particularly effective in treating hormone receptor-positive breast cancer. This type of cancer has receptors on the cancer cells that bind to estrogen, which fuels their growth. By reducing estrogen levels, Femistra helps inhibit the growth of these cancer cells.
Neoadjuvant Therapy:In some cases, Femistra may be used as neoadjuvant therapy, which means it is given before surgery to shrink tumors and increase the likelihood of successful surgical removal.
Metastatic Breast Cancer:Femistra may also be prescribed for the treatment of metastatic breast cancer (cancer that has spread to other parts of the body) in postmenopausal women.
Side Effect:
• Hot flashes• Joint pain or stiffness• Fatigue• Bone thinning (osteoporosis) or bone fractures• Muscle pain• Headache• Nausea• Skin rash
Dosages:
Dosage: The usual dosage is 1 mg of Femistra taken orally once daily.Administration: Femistra tablets should be taken at the same time each day, with or without food.Duration of Treatment: The duration of treatment with Femistra can vary based on the patient's specific condition and response to therapy. In many cases, treatment may continue for several years to reduce the risk of cancer recurrence.Adjuvant Treatment: Femistra is commonly used as adjuvant therapy, which means it is given after primary treatments like surgery to lower the risk of cancer recurrence.Metastatic Breast Cancer: For the treatment of metastatic breast cancer, the same 1 mg dosage is often used.Monitoring: Regular medical check-ups and monitoring, including bone density tests, may be conducted to assess treatment effectiveness and manage potential side effects.
FAQs:
1. What is Femistra (Anastrozole Tablet) used for?Ans. Femistra is used in the treatment of hormone receptor-positive breast cancer in postmenopausal women. It helps reduce the risk of cancer recurrence by lowering estrogen levels that fuel the growth of cancer cells.
2. How does Femistra work in treating breast cancer?Ans. Femistra is an aromatase inhibitor that reduces the production of estrogen in the body. By lowering estrogen levels, it inhibits the growth of hormone receptor-positive breast cancer cells.
3. How is Femistra administered?Ans. Femistra is taken orally as tablets. The recommended dosage is usually 1 mg once daily.
4. Can Femistra be taken with or without food?Ans. Femistra tablets can be taken with or without food. Follow your healthcare provider's instructions on how to take the medication.
Additional Information:
- Production Capacity: 1000
Enbrel 50mg Injection
Minimum Order Quantity: 1 Box
Product Brochure
Strength | 50 mg |
Packaging Size | 1 mL |
Packaging Type | Vial |
Brand Name | Enbrel |
Manufacturer Name | Pfizer |
Composition | Etanercept 25 mg |
Introduction:
Enbrel (etanercept) injection is a prescription medication used to treat various autoimmune conditions, particularly those that involve chronic inflammation. It belongs to a class of drugs known as tumor necrosis factor (TNF) inhibitors. Enbrel works by targeting and inhibiting TNF, a naturally occurring protein that plays a role in inflammation. By reducing TNF activity, Enbrel helps alleviate the symptoms and slow the progression of certain autoimmune diseases. The medication is administered through subcutaneous injections
Uses:
Rheumatoid Arthritis (RA):
Enbrel is used to treat rheumatoid arthritis, a chronic inflammatory disease that primarily affects the joints. It helps reduce joint pain, swelling, and stiffness, and can help slow down the progression of joint damage.
Psoriatic Arthritis (PsA):
Enbrel is indicated for psoriatic arthritis, a type of arthritis that often occurs in people with psoriasis. It helps manage joint inflammation and skin symptoms associated with psoriatic arthritis.
Ankylosing Spondylitis (AS):
Enbrel is used to treat ankylosing spondylitis, an inflammatory arthritis that primarily affects the spine and sacroiliac joints. It can help relieve pain, stiffness, and improve mobility.
Side Effects:
• Redness
• Swelling
• Pain
• Itching
• Bruising
• Cold symptoms
• Sinusitis
• Sore throat
• Anemia
• Low platelet count
Dosages:
Rheumatoid Arthritis (RA):
The typical dosage for adult patients with RA is 50 milligrams (mg) once a week, administered through a subcutaneous injection.
Psoriatic Arthritis (PsA):
For adult patients with psoriatic arthritis, the usual dosage is 50 mg once a week, administered through a subcutaneous injection.
Ankylosing Spondylitis (AS):
Adult patients with ankylosing spondylitis are often prescribed a dosage of 50 mg once a week, administered through a subcutaneous injection.
Plaque Psoriasis:
The recommended dosage for adult patients with plaque psoriasis is 50 mg twice a week for the first three months, followed by 50 mg once a week thereafter.
FAQs:
1. What is Enbrel injection?
Ans. Enbrel is a medication that belongs to the class of biologic drugs known as tumor necrosis factor (TNF) inhibitors. It is used to treat autoimmune conditions by inhibiting TNF, a protein that plays a role in inflammation.
2. What autoimmune conditions can Enbrel treat?
Ans. Enbrel is used to treat several autoimmune conditions, including rheumatoid arthritis, psoriatic arthritis, ankylosing spondylitis, plaque psoriasis, juvenile idiopathic arthritis, and axial spondyloarthritis.
3. How does Enbrel work?
Ans. Enbrel works by binding to TNF and inhibiting its action. By reducing TNF activity, Enbrel helps alleviate inflammation and related symptoms in autoimmune diseases.
4. How is Enbrel administered?
Ans. Enbrel is administered through subcutaneous injections. The frequency and dosage of injections may vary based on the specific condition being treated.
Additional Information:
- Production Capacity: 1000
Tobramycin Injection 2ml
Minimum Order Quantity: 1 Piece
Product Brochure
Dose/Strength | 80 mg |
Quantity Unit | Vial |
Packaging Size | 2 ml |
Country of origin | Made in indiam |
Composition | Tobramycin Injection |
Brand | Tobraget 80 |
Introduction:
Tobramycin Injection 2ml is a medication that belongs to the class of aminoglycoside antibiotics. It is an injectable form of tobramycin, which is used to treat various bacterial infections. Tobramycin works by interfering with the production of bacterial proteins, leading to the inhibition of bacterial growth and eventually causing the death of susceptible bacteria.
The 2ml designation in the name refers to the volume of the medication contained in each vial or ampule. The concentration of tobramycin in the injection will depend on the specific formulation and strength prescribed by the healthcare provider.
Tobramycin Injection is commonly used to treat infections caused by susceptible gram-negative bacteria, including strains of Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, and others. It is often used in the treatment of respiratory tract infections, urinary tract infections, skin and soft tissue infections, and certain types of sepsis.
Uses:
Respiratory Tract Infections: Tobramycin Injection may be used to treat respiratory tract infections, including pneumonia, bronchitis, and other lower respiratory tract infections caused by susceptible bacteria.
Urinary Tract Infections: It is effective in treating urinary tract infections, such as cystitis and pyelonephritis, caused by certain bacteria.
Skin and Soft Tissue Infections: Tobramycin Injection can be used to treat skin and soft tissue infections, including cellulitis, abscesses, and wound infections caused by susceptible bacteria.
Side Effects:
• Nausea and vomiting
• Diarrhea
• Headache
• Dizziness
• Rash or itching
• Injection site reactions (redness, swelling, or pain at the injection site)
• Changes in kidney function (increased levels of creatinine in the blood)
• Hearing loss or ringing in the ears (tinnitus)
• Balance problems or difficulty in coordination
Dosages:
For adults with normal kidney function: The usual dose is typically 1.5 to 2.5 mg per kg of body weight per dose, administered intravenously or intramuscularly every 8 to 12 hours. This dose may be adjusted based on the individual's response to treatment and any changes in kidney function.
For pediatric patients: Dosages for children are typically calculated based on their weight and age, and they may receive a dose similar to adults on a mg per kg basis. The dosing interval may be adjusted for pediatric patients based on their age and medical condition.
FAQs:
1. What is Tobramycin Injection 2ml used for?
Ans. Tobramycin Injection 2ml is an antibiotic medication used to treat bacterial infections caused by susceptible organisms. It is effective in treating respiratory tract infections, urinary tract infections, skin and soft tissue infections, sepsis, intra-abdominal infections, and certain burn wound infections.
2. How does Tobramycin Injection work?
Ans. Tobramycin belongs to the class of aminoglycoside antibiotics. It works by inhibiting bacterial protein synthesis, leading to the disruption of bacterial growth and eventually causing the death of susceptible bacteria.
3. How is Tobramycin Injection administered?
Ans. Tobramycin Injection is typically administered intravenously (directly into a vein) or intramuscularly (into the muscle). The specific route of administration and dosage will depend on the severity of the infection, the patient's age, weight, and kidney function, as well as the specific bacteria causing the infection.
Additional Information:
- Production Capacity: 1000
Mamofen 20 Tamoxifen Citrate Tablets
Minimum Order Quantity: 1 Stripe
Product Brochure
Dosage/Strength | 20 mg |
Packaging Type | Box |
Packaging Sizes | 10*10 Tablets |
Brand | Mamofen 20 |
Usage Application | Hospital |
Form | Tablet |
Country of Origin | Made in India |
Mamofen 20 is a brand name for a medication containing Tamoxifen Citrate in the form of tablets. Tamoxifen Citrate is the active pharmaceutical ingredient in Mamofen 20. It is a commonly used medication primarily employed in the treatment and prevention of certain types of breast cancer.Tamoxifen is classified as a selective estrogen receptor modulator (SERM). It works by blocking the effects of estrogen on breast tissue, as some breast cancers are hormone-sensitive and can grow in response to estrogen. By inhibiting the estrogen receptors in breast cells, Tamoxifen helps to slow down or halt the growth of these cancer cells.
Uses:
Treatment of Hormone Receptor-Positive Breast Cancer: Mamofen 20 is commonly used in the treatment of hormone receptor-positive breast cancer, which means the cancer cells have receptors that respond to estrogen or progesterone. By blocking the estrogen receptors in breast cells, Tamoxifen slows down or inhibits the growth of these cancer cells.Adjuvant Therapy for Breast Cancer: After surgery or radiation therapy for breast cancer, Mamofen 20 may be prescribed as adjuvant therapy to reduce the risk of cancer recurrence. It can be given to both premenopausal and postmenopausal women.Treatment of Advanced or Metastatic Breast Cancer: In some cases of advanced or metastatic breast cancer, where the cancer has spread to other parts of the body, Mamofen 20 may be used to control tumor growth and improve symptoms.
Side Effects:
• Hot Flashes• Nausea and Vomiting• Vaginal Discharge or Dryness• Irregular Menstrual Periods• Mood Changes• Fatigue• Headache• Dizziness• Bone Pain
Dosages:
For the treatment of breast cancer, the typical dosage of Tamoxifen (Mamofen 20) may range from 20 mg to 40 mg daily, taken either as a single dose or in divided doses. The duration of treatment will depend on the stage and type of breast cancer, as well as the overall treatment plan prescribed by the oncologist.For the prevention of breast cancer in high-risk individuals, the usual dosage is 20 mg of Tamoxifen once daily. In some cases, your doctor may prescribe a different dose based on your individual risk factors.
FAQs:
1. What is Mamofen 20 Tamoxifen Citrate Tablet used for?
Ans. Mamofen 20 Tamoxifen Citrate Tablet is primarily used for the treatment of hormone receptor-positive breast cancer in both premenopausal and postmenopausal women. It may also be prescribed for the prevention of breast cancer in individuals at high risk. Additionally, it can be used as adjuvant therapy for certain breast cancer cases after surgery or radiation treatment.
2. How does Mamofen 20 work?
Ans. Mamofen 20 contains the active ingredient Tamoxifen Citrate, which is a selective estrogen receptor modulator (SERM). It works by blocking the effects of estrogen on breast tissue. Since some breast cancers are hormone-sensitive and can grow in response to estrogen, Tamoxifen helps slow down or halt the growth of these cancer cells by inhibiting the estrogen receptors in breast cells.
3. What is the recommended dosage for Mamofen 20?
Ans. The dosage of Mamofen 20 (Tamoxifen Citrate) can vary depending on the medical condition being treated. For breast cancer treatment, the dosage typically ranges from 20 mg to 40 mg daily. For breast cancer prevention, the usual dosage is 20 mg once daily. The dosage for other indications, such as infertility treatment, may be different and should be determined by a healthcare professional based on individual circumstances.
Additional Information:
- Production Capacity: 1000
Benadryl Injection, 50ml
Minimum Order Quantity: 1 Piece
Product Brochure
Packaging Size | 50 ml |
Manufacturer | Hikma Pharmaceuticals |
Brand | Benadryl |
Prescription | Yes |
Color | pink |
Syrup For | Kids |
Country of Origin | Made in India |
Benadryl Injection, also known as Diphenhydramine Injection, is a medication used to treat various allergic reactions and allergic conditions. It is a fast-acting antihistamine that works by blocking the effects of histamine, a substance produced by the body in response to an allergic reaction.The active ingredient in Benadryl Injection, diphenhydramine, is the same as the one found in oral Benadryl tablets or liquid formulations. However, the injection form is usually reserved for more severe allergic reactions or situations where immediate relief is necessary.
Uses:
Allergic reactions: Benadryl injection is often used in emergency situations to treat severe allergic reactions, also known as anaphylaxis. Anaphylaxis is a life-threatening condition that can result from exposure to allergens such as foods, insect stings, medications, or other substances. The injection is given to quickly counteract the allergic response and alleviate symptoms like difficulty breathing, swelling, hives, and low blood pressure.Motion sickness and nausea: In some cases, when oral medication is not feasible, healthcare providers may administer Benadryl injection to manage motion sickness or nausea caused by various conditions.Itching and hives: Benadryl is commonly used to relieve itching and hives associated with allergic reactions, insect bites, or other skin irritations. In emergency situations where oral administration is not possible, healthcare providers may administer the injection to provide rapid relief.
Side Effects:
• Drowsiness or sedation• Dizziness or lightheadedness• Dry mouth• Blurred vision• Urinary retention• Gastrointestinal disturbances (nausea, vomiting, upset stomach)• Injection site reactions (pain, redness, swelling)• Hypotension (low blood pressure)
Dosages:
Allergic reactions and itching:Adults and children above 12 years: 25 to 50 mg injected into a muscle every 4 to 6 hours as needed.Children between 6 and 12 years: 12.5 to 25 mg injected into a muscle every 4 to 6 hours as needed.Children below 6 years: Dosage should be determined by a doctor.
Motion sickness:Adults and children above 12 years: 50 mg injected into a muscle or vein 30 minutes before travel, repeated every 4 to 6 hours if needed.Children below 12 years: Dosage should be determined by a doctor.
Parkinson's disease extrapyramidal reactions:Adults and children above 12 years: 10 to 50 mg injected into a muscle, repeated every 2 to 4 hours as needed.Children below 12 years: Dosage should be determined by a doctor.
FAQs:
1. What is Benadryl injection used for?Ans. Benadryl injection is used to treat allergic reactions, itching, and other symptoms caused by histamine release in the body. It can also be used for motion sickness and certain extrapyramidal reactions associated with Parkinson's disease.
2. How is Benadryl injection administered?Ans. Benadryl injection is typically administered as an intramuscular (IM) or intravenous (IV) injection by a healthcare professional.
3. Can I self-administer Benadryl injection at home?Ans. No, Benadryl injection should only be administered by a qualified healthcare professional in a clinical setting. It is not intended for self-administration.
4. How quickly does Benadryl injection work?Ans. The onset of action for Benadryl injection is usually within 15 to 30 minutes, providing rapid relief from symptoms.
Additional Information:
- Production Capacity: 1000
Acthar Gel Injection
Minimum Order Quantity: 1 Vial
Product Brochure
Strength | 400 units |
Packaging Size | 5 ml/Vial |
Brand | Acthar Gel |
Composition | Repository Cortitropin |
Treatment | Multiple sclerosis |
Country of Origin | Made in India |
Acthar Gel (repository corticotropin injection) is a medication used to treat a variety of medical conditions due to its anti-inflammatory and immunomodulatory properties. It is manufactured by Mallinckrodt Pharmaceuticals and is available in the form of a gel for injection.
The primary active ingredient in Acthar Gel is corticotropin, also known as adrenocorticotropic hormone (ACTH). ACTH is a naturally occurring hormone produced by the pituitary gland in the brain. It plays a crucial role in regulating the production of cortisol and other steroid hormones in the adrenal glands.
Uses:
Infantile Spasms: Acthar is a first-line treatment for infantile spasms, a rare and severe form of epilepsy that typically affects infants between 3 and 12 months of age. It helps reduce the frequency and severity of spasms, improving the overall prognosis for affected children.Multiple Sclerosis (MS) Exacerbations: Acthar is used to manage acute exacerbations of multiple sclerosis in adults. It helps to reduce inflammation in the central nervous system and hasten recovery from MS relapses.Rheumatoid Arthritis (RA): Acthar is prescribed as an alternative treatment for adults with severe rheumatoid arthritis who have not responded well to other therapies. It helps reduce joint inflammation and pain associated with RA.
Side Effects:
• Increased blood pressure• Fluid retention• Weight gain• Mood swings• Insomnia• Increased appetite• Gastrointestinal upset (nausea, vomiting)• Acne
Dosages:
Infantile Spasms:The typical starting dose for infantile spasms is around 150 IU/m² (international units per square meter) per day, divided into two equal injections given in the morning and evening. The dosage may be adjusted based on the infant's response and tolerance to the treatment.
Multiple Sclerosis (MS) Exacerbations:For MS exacerbations, the usual dosage is 80 to 120 IU (international units) per day for a period of 2 to 3 weeks. The dosing regimen may be adjusted based on the patient's response and the severity of the exacerbation.
Rheumatoid Arthritis (RA):For rheumatoid arthritis, the typical starting dose is 40 to 80 IU every other day or 80 IU three times a week. The healthcare provider may adjust the dosage based on the patient's response and disease activity.
Nephrotic Syndrome:In cases of nephrotic syndrome, the dosage is typically 40 to 80 IU every other day or 80 IU three times a week. The treatment may be continued for a period of 2 to 6 months or longer, depending on the patient's response.
FAQs:
1. What is Acthar Gel (repository corticotropin injection), and what is it used for?Ans. Acthar Gel is a medication that contains the active ingredient corticotropin (adrenocorticotropic hormone or ACTH). It is used to treat various medical conditions, including infantile spasms, multiple sclerosis exacerbations, rheumatoid arthritis, certain types of nephrotic syndrome, systemic lupus erythematosus (SLE), and certain dermatological and ophthalmic conditions.
2. How does Acthar Gel work?Ans. Acthar Gel exerts its effects by stimulating the release of steroid hormones from the adrenal glands. These hormones help regulate various physiological processes, including immune system function, inflammation, and stress response. The anti-inflammatory and immunomodulatory properties of ACTH make Acthar Gel effective in managing certain medical conditions.
3. How is Acthar Gel administered?Ans. Acthar Gel is given through intramuscular or subcutaneous injection, meaning it is injected into the muscle or under the skin. The exact method and frequency of administration depend on the patient's medical condition and the healthcare provider's recommendations.
Additional Information:
- Production Capacity: 1000
Vitamin D3 Tablets
Minimum Order Quantity: 1 Bottle
Product Brochure
Pack Size | 30 ml |
Pack Type | Bottle |
Form | Drop |
Brand Name | Vit-D3 |
Key Ingredient | Vitamin D3 400 IU Drop |
Country of Origin | Made in India |
Vitamin D3, also known as cholecalciferol, is a fat-soluble vitamin that plays a crucial role in maintaining overall health and well-being. It is one of the several forms of vitamin D, which collectively are essential for various bodily functions. Vitamin D3 is unique because it can be synthesized by the skin when exposed to sunlight and is also obtained through certain dietary sources and supplements.
Uses:
Bone Health: Vitamin D3 is crucial for maintaining strong and healthy bones. It helps the body absorb calcium and phosphorus from the intestines, which are essential minerals for bone formation, growth, and mineralization. Adequate vitamin D3 levels can help prevent conditions like osteoporosis and rickets.
Muscle Function: Vitamin D3 is involved in muscle function and strength. It can help improve muscle strength and balance, which is especially important for older adults to reduce the risk of falls and fractures.
Immune System Support: Vitamin D3 plays a role in supporting the immune system by regulating immune cell activity and enhancing the body's defense against infections. It has been studied for its potential to reduce the risk and severity of respiratory infections, autoimmune diseases, and other immune-related conditions.
Side Effects:
• Elevated blood calcium levels (hypercalcemia)• Nausea• Vomiting• Loss of appetite• Confusion• Weakness• Kidney stones• Dosages to Vitamin D3• Strain on kidneys due to calcium regulation• Kidney damage or impairment with prolonged excessive intake
Dosages:
Infants (0-12 months): 400-1000 IU (10-25 mcg) per dayChildren (1-18 years): 600-1000 IU (15-25 mcg) per dayAdults (19-70 years): 600-800 IU (15-20 mcg) per dayAdults (71 years and older): 800-1000 IU (20-25 mcg) per day
FAQs:
1. What is vitamin D3, and why is it important?Ans. Vitamin D3, also known as cholecalciferol, is a fat-soluble vitamin essential for various bodily functions. It plays a crucial role in maintaining bone health, supporting the immune system, regulating cell growth, and more.
2. How do I get vitamin D3?Ans. Vitamin D3 can be obtained through exposure to sunlight, consumption of certain foods (fatty fish, egg yolks, fortified dairy products), and supplements.
3. Can I get enough vitamin D3 from sunlight alone?Ans. Yes, sunlight exposure triggers the skin to produce vitamin D3. Spending about 10-30 minutes in the sun a few times a week can help meet your vitamin D3 needs. However, factors like skin tone, geographical location, time of day, and sunscreen use can affect how much vitamin D3 your skin produces.
4. Who is at risk of vitamin D3 deficiency?Ans. People with limited sun exposure, those with dark skin, older adults, individuals with certain medical conditions (malabsorption, obesity), and those who follow strict vegetarian or vegan diets may be at higher risk of deficiency.
Additional Information:
- Production Capacity: 1000
Cyanocobalamin Injection 1000 MCG
Minimum Order Quantity: 1 Piece
Product Brochure
Pack Size | 1 ml |
Pack Type | Vial |
Strength | 1000mcg |
Brand Name | Cyanocobalamin |
Usages | To treat nutrient deficiencies and to support overall health and wellbeing |
Country of Origin | Made in India |
Cyanocobalamin injection is a medication used to treat and prevent vitamin B12 deficiency. Vitamin B12, also known as cobalamin, is an essential nutrient that plays a vital role in various bodily functions, including the production of red blood cells, DNA synthesis, and nerve function. Cyanocobalamin is a synthetic form of vitamin B12 and is widely used in medical settings to address deficiencies and maintain adequate B12 levels.
Uses:
Treatment of Vitamin B12 Deficiency: Vitamin B12 deficiency can occur due to various reasons, including poor dietary intake, certain medical conditions that affect B12 absorption (e.g., pernicious anemia), gastrointestinal disorders, or the use of medications that interfere with B12 absorption. Cyanocobalamin injection is an effective way to rapidly restore B12 levels in individuals with deficiency.Pernicious Anemia: Pernicious anemia is an autoimmune condition where the body's immune system attacks the cells in the stomach that produce intrinsic factor, a substance necessary for B12 absorption. Cyanocobalamin injections are the preferred treatment for pernicious anemia because the body's ability to absorb B12 from dietary sources is impaired.Maintenance Therapy: For individuals with chronic B12 deficiency or conditions that affect B12 absorption, long-term maintenance therapy with Cyanocobalamin injections may be necessary. Regular injections are used to prevent B12 deficiency from recurring and maintain adequate B12 levels in the body.
Side Effects:
• Pain or discomfort at the injection site• Redness or swelling at the injection site• Itching or mild skin reactions at the injection site• Mild diarrhea• Feeling dizzy or headache• Allergic reactions (difficulty breathing, swelling of face, lips, tongue, throat, hives, severe itching)• Chest pain or rapid heartbeat (very rare)• Cyanide toxicity (very rare, typically only with extremely high doses or in specific genetic conditions)
Dosages:
Treatment of Vitamin B12 Deficiency: Typical dosage ranges from 1000 mcg to 2000 mcg as an intramuscular (IM) or subcutaneous (sub-Q) injection, frequency varies based on deficiency severity and response to treatment.Maintenance Therapy: For preventing B12 deficiency from recurring, a typical maintenance dosage is 1000 mcg, given once a month or as prescribed by the healthcare provider.Pernicious Anemia: Initial dosages for pernicious anemia may be higher (e.g., 1000 mcg or more) and can continue as maintenance therapy.Malabsorption Syndromes: Higher doses may be required in individuals with malabsorption syndromes that hinder B12 absorption from oral supplements.
FAQs:
1. What is Cyanocobalamin Injection 1000 mcg used for?Ans. Cyanocobalamin injection 1000 mcg is used to treat and prevent vitamin B12 deficiency. It is commonly used in conditions such as pernicious anemia, malabsorption syndromes, and for individuals at risk of B12 deficiency.
2. How is Cyanocobalamin Injection 1000 mcg administered?Ans. Cyanocobalamin injection 1000 mcg is typically given as an intramuscular (IM) or subcutaneous (sub-Q) injection. The dosage and frequency of injections will depend on the individual's specific condition and the severity of their B12 deficiency.
3. What are the common side effects of Cyanocobalamin Injection 1000 mcg?Ans. Common side effects may include pain, redness, or swelling at the injection site, mild diarrhea, itching, feeling dizzy, or headache. These side effects are generally mild and temporary.
Additional Information:
- Production Capacity: 1000
Pegadria 20mg Doxorubicin (Liposomal) Injection
Minimum Order Quantity: 1 Vial
Product Brochure
Pack Type | Box |
Brand Name | Pegadria 20mg |
Manufacturer | Intas Pharmaceuticals Ltd |
Composition | Doxorubicin (Liposomal) Injection |
Brand | Pegadria 20mg |
Packaging Size | 1*1 |
Country of Origin | Made in India |
Pegadria 20mg Doxorubicin (Liposomal) Injection is a medication used in the treatment of certain types of cancer. It contains the active ingredient doxorubicin, which is an anthracycline chemotherapy drug. The liposomal formulation of doxorubicin in Pegadria allows for targeted delivery of the medication to cancer cells, potentially improving its effectiveness while reducing some side effects.
Uses:
Ovarian Cancer: Pegadria Injection may be used as a treatment for ovarian cancer. It can be used in combination with other chemotherapy drugs or as a single-agent therapy.Multiple Myeloma: Pegadria 20mg Doxorubicin (Liposomal) Injection may be prescribed for the treatment of multiple myeloma, a type of cancer that affects plasma cells in the bone marrow.Kaposi's Sarcoma in AIDS Patients: Pegadria Injection is indicated for the treatment of Kaposi's sarcoma in patients with acquired immunodeficiency syndrome (AIDS). Kaposi's sarcoma is a cancer that often occurs in individuals with weakened immune systems.
Side Effect:
• Nausea• Vomiting• Fatigue• Diarrhea• Mouth sores• Decreased appetite• Hair loss (alopecia)• Changes in blood cell counts (anemia, neutropenia, thrombocytopenia)• Increased risk of infection• Cardiac toxicity (monitoring may be required)
Dosages:
For Ovarian Cancer:The typical recommended dosage of Pegadria 20mg Doxorubicin (Liposomal) Injection for the treatment of ovarian cancer can vary. It may be administered every 4 weeks (28-day cycle) in combination with other chemotherapy drugs.
For Multiple Myeloma:Pegadria Injection may be prescribed for the treatment of multiple myeloma. The dosage and treatment schedule will be determined by your oncologist based on your specific condition.
For Kaposi's Sarcoma in AIDS Patients:The dosage and treatment schedule for Kaposi's sarcoma may differ from other types of cancer.Your doctor will determine the appropriate dosage and frequency of administration.
Dosage Adjustment and Administration:Pegadria 20mg Doxorubicin (Liposomal) Injection is administered as an intravenous (IV) infusion by a healthcare professional in a medical setting, such as a hospital or clinic.Your healthcare provider will closely monitor your progress during treatment, including blood tests, cardiac assessments, and other evaluations, to manage potential side effects and ensure the effectiveness of the medication.
FAQs:
1. What is Pegadria 20mg Doxorubicin (Liposomal) Injection used for?Ans. Pegadria Injection is used in the treatment of specific types of cancer, including ovarian cancer, multiple myeloma, and Kaposi's sarcoma in patients with acquired immunodeficiency syndrome (AIDS).
2. How does the liposomal formulation of doxorubicin work in cancer treatment?Ans. The liposomal formulation of doxorubicin allows for targeted delivery of the medication to cancer cells, potentially improving its effectiveness while reducing some side effects.
3. How is Pegadria 20mg Doxorubicin (Liposomal) Injection administered?Ans. Pegadria Injection is administered as an intravenous (IV) infusion by a healthcare professional in a medical setting, such as a hospital or clinic.
4. What are the common side effects of Pegadria Injection?Ans. Common side effects may include nausea, vomiting, fatigue, mouth sores, decreased appetite, changes in blood cell counts, and potential cardiac toxicity.
Additional Information:
- Production Capacity: 1000
Luprone Acetate 22.5 Mg Injection
Minimum Order Quantity: 1 Box
Product Brochure
Packaging | 1 mg/0.2 ml |
Brand | Lupron |
Usage /Application | Hospital |
Treatment | Prostate cancer |
Prescription/Non prescription | Prescription |
Country of Origin | Made in India |
Lupron (leuprolide acetate) injection is a medication used for various medical conditions, primarily related to hormonal regulation. It belongs to a class of drugs known as gonadotropin-releasing hormone (GnRH) agonists. Lupron is administered through injection and works by suppressing the production of certain hormones, leading to reduced levels of estrogen and testosterone in the body. This can be beneficial for managing several medical conditions.
Uses:
Prostate Cancer Treatment: Lupron injection is often used in the treatment of advanced prostate cancer. By lowering testosterone levels, it can slow the growth and spread of prostate cancer cells.Endometriosis Management: Lupron injection is prescribed to manage endometriosis, a condition where tissue similar to the uterine lining grows outside the uterus. Lupron helps reduce the growth of endometrial tissue, alleviating pain and other symptoms associated with the condition.Uterine Fibroid Treatment: Lupron injection may be used to shrink uterine fibroids before surgical removal (myomectomy) or as a stand-alone treatment to relieve symptoms like heavy menstrual bleeding and pelvic discomfort.Central Precocious Puberty (CPP) Delay: In children with central precocious puberty (CPP), where puberty begins too early, Lupron injection is administered to delay the onset of puberty until a more appropriate age.
Side Effects:
• Hot flashes.• Sweating.• Fatigue.• Headache.• Decreased libido (sexual desire).• Injection site reactions (pain, redness, swelling).• Mood changes (depression, anxiety, irritability).• Insomnia (difficulty sleeping).• Joint or muscle pain.• Nausea or vomiting.• Dizziness.
Dosages:
Prostate Cancer:For the treatment of advanced prostate cancer, the standard dosage is often 22.5 mg administered as a subcutaneous injection once every three months.
Endometriosis:For the management of endometriosis, the standard dosage is often 3.75 mg to 11.25 mg administered as a subcutaneous injection once every month for several months.
Uterine Fibroids:For the treatment of uterine fibroids, the standard dosage is often 3.75 mg administered as a subcutaneous injection once every month for several months, sometimes followed by a maintenance dose of 11.25 mg once every three months.
FAQs:
1. What is Lupron injection used for?Ans. Lupron injection is used for various medical conditions, including advanced prostate cancer, endometriosis, uterine fibroids, central precocious puberty, and as part of fertility treatment protocols.
2. How does Lupron injection work?Ans. Lupron injection suppresses the release of gonadotropin-releasing hormone (GnRH), which leads to decreased production of sex hormones like estrogen and testosterone.
3. How is Lupron injection administered?Ans. Lupron injection is typically administered as a subcutaneous injection (under the skin) by a healthcare professional.
4. What are the common side effects of Lupron injection?Ans. Common side effects may include hot flashes, sweating, fatigue, headache, decreased libido, and injection site reactions.
Additional Information:
- Production Capacity: 1000
Luprone Acetate 22.5 Mg Injection
Minimum Order Quantity: 1 Pack
Product Brochure
Packaging | 22.5 mg/Vial |
Dosage Form | Lupron Depot |
Composition | Leuprolide Acetate |
Treatment | Prostate cancerProstate |
Prescription/Non prescription | Prescription |
Country of Origin | Made in India |
Lupron (leuprolide acetate) injection is a medication used for various medical conditions, primarily related to hormonal regulation. It belongs to a class of drugs known as gonadotropin-releasing hormone (GnRH) agonists. Lupron is administered through injection and works by suppressing the production of certain hormones, leading to reduced levels of estrogen and testosterone in the body. This can be beneficial for managing several medical conditions.
Uses:
Prostate Cancer Treatment: Lupron injection is often used in the treatment of advanced prostate cancer. By lowering testosterone levels, it can slow the growth and spread of prostate cancer cells.Endometriosis Management: Lupron injection is prescribed to manage endometriosis, a condition where tissue similar to the uterine lining grows outside the uterus. Lupron helps reduce the growth of endometrial tissue, alleviating pain and other symptoms associated with the condition.Uterine Fibroid Treatment: Lupron injection may be used to shrink uterine fibroids before surgical removal (myomectomy) or as a stand-alone treatment to relieve symptoms like heavy menstrual bleeding and pelvic discomfort.Central Precocious Puberty (CPP) Delay: In children with central precocious puberty (CPP), where puberty begins too early, Lupron injection is administered to delay the onset of puberty until a more appropriate age.
Side Effects:
• Hot flashes.• Sweating.• Fatigue.• Headache.• Decreased libido (sexual desire).• Injection site reactions (pain, redness, swelling).• Mood changes (depression, anxiety, irritability).• Insomnia (difficulty sleeping).• Joint or muscle pain.• Nausea or vomiting.• Dizziness.
Dosages:
Prostate Cancer:For the treatment of advanced prostate cancer, the standard dosage is often 22.5 mg administered as a subcutaneous injection once every three months.
Endometriosis:For the management of endometriosis, the standard dosage is often 3.75 mg to 11.25 mg administered as a subcutaneous injection once every month for several months.
Uterine Fibroids:For the treatment of uterine fibroids, the standard dosage is often 3.75 mg administered as a subcutaneous injection once every month for several months, sometimes followed by a maintenance dose of 11.25 mg once every three months.
FAQs:
1. What is Lupron injection used for?Ans. Lupron injection is used for various medical conditions, including advanced prostate cancer, endometriosis, uterine fibroids, central precocious puberty, and as part of fertility treatment protocols.
2. How does Lupron injection work?Ans. Lupron injection suppresses the release of gonadotropin-releasing hormone (GnRH), which leads to decreased production of sex hormones like estrogen and testosterone.
3. How is Lupron injection administered?Ans. Lupron injection is typically administered as a subcutaneous injection (under the skin) by a healthcare professional.
4. What are the common side effects of Lupron injection?Ans. Common side effects may include hot flashes, sweating, fatigue, headache, decreased libido, and injection site reactions.
Additional Information:
- Production Capacity: 1000
Methylprednisolone Injection 500mg
Minimum Order Quantity: 1 Piece
Product Brochure
Drug Type | Methylprednisolone Sodium Succinate Injection |
Brand | Solu Medrol |
Manufacturer | Pfizer Ltd |
Strength | 500mg |
Packaging Type | Vial |
Composition | Methylprednisolone |
Country of Origin | Made in India |
Methylprednisolone injection is a medication that belongs to the corticosteroid class of drugs. Corticosteroids are synthetic versions of hormones produced by the adrenal glands, which play essential roles in regulating various bodily functions. Methylprednisolone injection is used for its anti-inflammatory and immunosuppressive properties to treat a wide range of medical conditions. It is available in various forms, including intravenous and intramuscular injections.
Uses:
Inflammatory and Autoimmune Disorders:Rheumatoid Arthritis: Methylprednisolone injection is used to reduce inflammation and manage symptoms in patients with rheumatoid arthritis.Lupus: It helps control the immune response and inflammation in systemic lupus erythematosus (SLE).Inflammatory Bowel Disease: Methylprednisolone is used in severe cases of Crohn's disease and ulcerative colitis to control inflammation and alleviate symptoms.Allergic Reactions and Anaphylaxis:
Allergic Reactions: Methylprednisolone injection is employed to rapidly suppress severe allergic reactions, including anaphylaxis, by reducing inflammation and stabilizing the immune system.Respiratory Conditions:
Severe Asthma Exacerbations: Methylprednisolone injection is administered during severe asthma attacks to quickly reduce airway inflammation and improve breathing.Dermatological Conditions:
Skin Inflammation: It can be used to manage severe or localized skin conditions like psoriasis, eczema, and dermatitis by reducing inflammation and controlling symptoms.Autoimmune Disorders:
Multiple Sclerosis: Methylprednisolone is sometimes used in managing acute exacerbations of multiple sclerosis to suppress the immune response attacking nerve cells.
Side Effect:
• Temporary increases in blood sugar levels• Fluid retention and swelling (edema)• Mood changes (e.g., irritability, anxiety)• Changes in appetite and weight• Difficulty sleeping (insomnia)• Upset stomach or indigestion• Increased risk of infections• Muscle weakness
Dosages:
Anti-Inflammatory and Immunosuppressive Uses:For severe inflammatory conditions, such as autoimmune disorders or severe allergic reactions:Initial dosages may range from 40 to 500 milligrams (mg) administered as a single injection or divided into multiple doses.Dosages can vary depending on the specific condition, and treatment may involve both initial high doses and subsequent tapering.
Respiratory Conditions:For severe asthma exacerbations:Initial dosages may range from 40 to 125 mg as a single injection or divided into multiple doses.The treatment duration is generally shorter, and dosages may be lower than for other conditions.
FAQs:
1. What is methylprednisolone injection?Ans. Methylprednisolone injection is a medication belonging to the corticosteroid class used to treat a variety of medical conditions by reducing inflammation and suppressing the immune response.
2. How does methylprednisolone injection work?Ans. Methylprednisolone works by suppressing the body's immune response and reducing inflammation. It mimics the effects of natural hormones produced by the adrenal glands.
3. What conditions are treated with methylprednisolone injection?Ans. Methylprednisolone injection is used to treat inflammatory and autoimmune conditions, severe allergies, respiratory disorders like asthma exacerbations, certain skin conditions, and to support cancer treatment and transplantation.
4. How is methylprednisolone injection administered?Ans. Methylprednisolone injection is typically administered by a healthcare provider as an intravenous or intramuscular injection. The dosage and frequency depend on the medical condition being treated.
Additional Information:
- Production Capacity: 1000
Gliogen 100mg Temozolomide Tablet
Minimum Order Quantity: 1 Bottle
Product Brochure
Strength | 100 mg |
Manufacturer | Samarth Life Sciences Pvt Ltd |
Usage/Application | Hospital |
Prescription/Non prescription | Prescription |
Composition | Temozolomide Tablet |
Form | Tablet |
Treatment | Brain tumor |
Country of Origin | Made in India |
Gliogen 100mg is a brand name for a medication called Temozolomide. Temozolomide is an oral chemotherapy drug used in the treatment of certain types of brain tumors, specifically malignant gliomas. It belongs to a class of medications known as alkylating agents, which work by damaging the DNA of cancer cells, preventing their growth and division.
Uses:
Glioblastoma Multiforme (GBM): Gliogen 100mg is commonly used in the treatment of newly diagnosed glioblastoma multiforme (GBM), which is the most aggressive and common type of malignant brain tumor in adults. It is often used in combination with radiation therapy as part of the standard treatment regimen.Anaplastic Astrocytoma: Gliogen 100mg is also used for the treatment of recurrent anaplastic astrocytoma, which is another type of malignant brain tumor. It can be prescribed in cases where the tumor has come back after initial treatment.Off-Label Uses: In some cases, Gliogen 100mg may be used off-label in the treatment of other types of brain tumors or cancers. The decision to use it off-label would be based on individual patient factors and the judgment of the healthcare provider.
Side Effect:
• Nausea• Vomiting• Fatigue• Headache• Constipation• Loss of appetite• Hair loss• Skin rash• Low blood cell counts (anemia, leukopenia, thrombocytopenia)• Increased susceptibility to infections
Dosages:
For Glioblastoma Multiforme (GBM):The typical recommended starting dose of Gliogen for the treatment of newly diagnosed glioblastoma multiforme (GBM) is usually around 75 mg/m² to 200 mg/m² of body surface area per day, taken orally once daily.The medication is typically taken in combination with radiation therapy during the initial treatment phase.
For Recurrent Anaplastic Astrocytoma:The recommended starting dose for the treatment of recurrent anaplastic astrocytoma is often around 150 mg/m² of body surface area per day, taken orally once daily for a specified number of days in a treatment cycle.
Dosage Adjustment and Schedule:The dosage and treatment schedule will be determined by your healthcare provider based on your specific diagnosis and individual response to treatment.Temozolomide is often given in cycles, where you take the medication daily for a certain number of days, followed by a break of several weeks before starting the next cycle.
FAQs:
1. What is Gliogen 100mg (Temozolomide) used for?Ans. Gliogen 100mg is primarily used for the treatment of specific types of brain tumors, including newly diagnosed glioblastoma multiforme (GBM) and recurrent anaplastic astrocytoma.
2. How does Gliogen work in treating brain tumors?Ans. Temozolomide, the active ingredient in Gliogen, is an alkylating agent that damages the DNA of rapidly dividing cancer cells, inhibiting their growth and division.
3. How should I take Gliogen 100mg tablets?Ans. Gliogen is usually taken orally, once daily, at bedtime. The dosage and treatment schedule will be determined by your healthcare provider based on your specific condition.
4. What are the common side effects of Gliogen (Temozolomide)?Ans. Common side effects may include nausea, vomiting, fatigue, headache, constipation, hair loss, low blood cell counts, and skin rash. Your doctor will monitor you for these and other potential side effects.
Additional Information:
- Production Capacity: 1000
Biovorin 50mg Calcium Leucovorin Injection
Minimum Order Quantity: 1 Piece
Product Brochure
Dose | 50 mg/5 ml |
Brand | Biovorin Injection |
Packaging Type | box |
Composition | Calcium Leucovorin Injection |
Injectable Form | Liquid |
Packaging Size | 1*1 |
Strength | 50 mg |
Country of Origin | Made in India |
Leucovorin, also known as folinic acid or calcium folinate, is a medication commonly used in cancer treatment, specifically in combination with certain chemotherapy drugs to enhance their effectiveness while minimizing their side effects. Leucovorin is a form of folic acid and helps support the body's normal production of DNA and RNA.The term "Biovorin 50mg Calcium Leucovorin Injection" suggests that it might be a specific formulation of leucovorin delivered via injection. The dosage of 50mg indicates the amount of leucovorin contained in each injection.
Uses:
Cancer Treatment: Leucovorin is often used as an adjuvant therapy in combination with certain chemotherapy drugs, such as methotrexate, to enhance the efficacy of the chemotherapy while reducing its toxic effects on healthy cells. Leucovorin helps "rescue" healthy cells from the effects of chemotherapy, allowing them to continue functioning while cancer cells are targeted.Colorectal Cancer: Leucovorin may be used in the treatment of colorectal cancer. It is often combined with a chemotherapy regimen known as FOLFOX, which includes drugs like oxaliplatin and 5-fluorouracil (5-FU).Methotrexate Toxicity Management: Leucovorin is used to counteract the toxic effects of methotrexate, a chemotherapy drug. Leucovorin can help reduce the harmful impact of methotrexate on normal cells, especially in high-dose methotrexate regimens.Osteosarcoma: Leucovorin is sometimes utilized in the treatment of osteosarcoma, a type of bone cancer, in combination with other chemotherapy drugs.Rheumatoid Arthritis: Leucovorin has also been used as an adjunct therapy in the treatment of rheumatoid arthritis, although this use is less common.
Side Effect:
• Gastrointestinal Distress• Allergic Reactions• Mouth Sores• Skin Reactions• Low Blood Cell Counts• Fatigue• Injection Site Reactions• Liver Enzyme Changes• Kidney Effects• Neurological Effects
Dosages:
For accurate and up-to-date dosing information for "Biovorin 50mg Calcium Leucovorin Injection," I recommend consulting a healthcare professional, such as a doctor or pharmacist. They will be able to provide you with the most current and relevant dosing guidelines based on your individual needs and medical history.
Additional Information:
- Production Capacity: 1000
Celkeran 2 Chlorambucil Tablet
Minimum Order Quantity: 1 Box
Product Brochure
Strength | 2 mg |
Pack Size | 1*30 Tablets |
Pack Type | Box |
Brand Name | Celkeran 2 |
Brand | Celkeran 2 |
Packaging Size | 1*30 |
Country of Origin | Made in India |
Celkeran 2 Chlorambucil Tablet is a medication commonly used in the treatment of certain types of cancer, particularly chronic lymphocytic leukemia (CLL) and certain lymphomas. It belongs to a class of drugs known as alkylating agents, which work by interfering with the DNA in cancer cells, ultimately inhibiting their ability to divide and grow. Here are some key points about Celkeran 2 Chlorambucil Tablet
Uses:
Chronic Lymphocytic Leukemia (CLL): Celkeran 2 Chlorambucil Tablet is commonly prescribed for the treatment of chronic lymphocytic leukemia, a type of cancer that affects the white blood cells in the bone marrow and blood. It is often used as an initial treatment or for managing the disease in certain cases.Lymphomas: Celkeran 2 Chlorambucil Tablet may be used in the treatment of certain types of lymphomas, which are cancers that originate from lymphocytes (a type of white blood cell). It can be used for both Hodgkin lymphoma and non-Hodgkin lymphoma.Waldenström Macroglobulinemia: Celkeran may also be used in the treatment of Waldenström macroglobulinemia, a rare type of non-Hodgkin lymphoma characterized by abnormal protein production.Other Cancers: In some cases, Celkeran 2 Chlorambucil Tablet may be considered for the treatment of other types of cancer, as determined by your oncologist.
Side Effect:
• Nausea and vomiting• Diarrhea• Loss of appetite• Fatigue or weakness• Mouth sores or ulcers• Hair loss (alopecia)• Decreased blood cell counts (anemia, neutropenia)• Increased risk of infections• Easy bruising or bleeding• Fever or chills
Dosages:
For Chronic Lymphocytic Leukemia (CLL):The typical dosage of Celkeran 2 Chlorambucil Tablet for CLL can range from 0.1 mg/kg to 0.2 mg/kg of body weight per day.It is often taken orally as a single daily dose or divided into multiple doses.
For Lymphomas:The dosing of Celkeran 2 Chlorambucil Tablet for lymphomas may vary based on the specific treatment plan and type of lymphoma being treated.Dosages may range from 0.1 mg/kg to 0.4 mg/kg of body weight per day.
Dosage Adjustment and Administration:Celkeran 2 Chlorambucil Tablet is taken orally as a tablet. The tablets should be swallowed whole with water and can be taken with or without food.Your oncologist will determine the most appropriate dosage and treatment plan based on your specific diagnosis, overall health, and treatment goals.
FAQs:
1. What is Celkeran 2 Chlorambucil Tablet used for?Ans. Celkeran 2 Chlorambucil Tablet is primarily used in the treatment of chronic lymphocytic leukemia (CLL), certain types of lymphomas, and other cancers, as determined by your oncologist.
2. How does Celkeran 2 Chlorambucil Tablet work in cancer treatment?Ans. Celkeran 2 Chlorambucil Tablet is an alkylating agent that interferes with the DNA in cancer cells, preventing their ability to divide and grow.
3. How is Celkeran 2 Chlorambucil Tablet taken?Ans. Celkeran 2 Chlorambucil Tablet is taken orally as a tablet, usually once daily or as directed by your healthcare provider.
4. What are the common side effects of Celkeran treatment?Ans. Common side effects may include nausea, vomiting, diarrhea, fatigue, decreased blood cell counts, increased risk of infections, and potential effects on the liver and kidneys.
Additional Information:
- Production Capacity: 1000
View More